Amprobe ACD-10 PLUS 600A Clamp Multimeter

Amprobe ACD-10 PLUS 600A Clamp Multimeter

  • Measures AC and DC voltage to 600V and AC current to 600A to handle residential/commercial and small industrial applications
  • Thin jaws, only 10mm (0.4″) thick make it easier to maneuver between tightly packed conductors
  • Measures frequency, resistance, and capacitance
  • Features continuity beeper to quickly find opens and shorts
  • Accommodates conductors up to 1.0″ (25mm) in diameter
  • Auto ranging saves time by instantly selecting correct range
  • Auto power off to conserve battery life
  • Rubber over-molded case absorbs shock
  • Includes test leads, battery (installed), soft carrying pouch, and users manual


SKU: 3037808 Category:


The Amprobe ACD-10 PLUS clamp multimeter has thinner jaws than standard digital clamp multimeters (only 0.4″/10mm thick) allowing access to tight measurement areas and still handles conductors up to 1.0 (25mm).

It combines the convenience and flexibility of an AC/DC current clamp meter with the most frequently used digital multimeter functions, including ac/dc current and voltage, capacitance, and frequency.


AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Dual displays
Micro Amps
Accommodates conductors up to 1.0″ (25 mm) in diameter
Display: 3-3/4 digits 4000 counts LCD display
Update rate: 3 per second nominal
Polarity: Automatic
Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude: Operating below 2000m; Indoor use
Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery: Below approx. 2.4V
Power supply: 3V coin battery IEC-CR2032
Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
APO timing: Idle for 30 minutes
APO consumption: 5 µA typical
Jaw opening conductor diameter: max 26 mm
Special features: 30ms Max Hold; Data Hold; Relative Zero mode

For complete specs please download the product datasheet under the “Resources” tab.

What’s Included

  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin Jaws, only 10mm (0.4”) thick
  • Resistance to 40MΩ

Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual


Data Sheet »
Product Manual »

10 reviews for Amprobe ACD-10 PLUS 600A Clamp Multimeter

  1. tallicdeth

    Great features for the price, however…

    This meter does almost everything you’d want it to if you’re looking for a multimeter. It will check volts, amps, duty, Hz and capacitance with relative ease and quick readings.

    It doesn’t feature anything that would be great for an HVAC trades person, as it doesn’t do microamps, but it’s handling of DCmV is excellent and was actually slightly more accurate than my more expensive meter.

    For the price, it’s great. As a backup for a more expensive meter, it will do in a pinch, and it’s great for people in non-specific trades that only need the features it offers. It fits great in the hand and has a large display with a good backlight.

    Battery life is astounding!

    ✔ Yes, I recommend this product.

  2. captainbill19

    made me feel safer

    this was the first clamp type meter I have ever used. I was helping an electrician freind with a wiring job. I used the clamp meter to check that power was properly routed and also to verify power was off. In the past I had always used probe type and always had the thought of accidentally touching wires on the back of my mind. This meter made me feel a whole lot safer and made the job much easier. This will be the brand and type of meter I buy when I am ready, very soon I think.

    ✔ Yes, I recommend this product.

  3. jrw5

    This meter is rugged and has been a great testing tool

    I have used this meter for checking computer room wiring and load balance to grounding issues.It has been droped and
    Keeps on Ticking.A must tool for general electrial testing.

    ✔ Yes, I recommend this product.

  4. Sillbill

    great for all purposes

    This product has the most wide range of different things you can use it for.

    ✔ Yes, I recommend this product.

  5. Bill56

    This is a versatile multimeter and clamp on.

    I’ve used this meter for just about everything from solid state bench work to balancing panels. It’s ruggedness was proven when I forgot it was in my back pocket and sat on it, when I stood up it fell onto the concrete floor. It just keeps working.

    ✔ Yes, I recommend this product.

  6. TP803

    Great meter with many features!

    Got this meter over a year ago and have enjoyed it. I am an hvac tech and use this as a second meter at times but have used it in troubeshooting. It has many of the basic features needed volts/amps/resistance/capacitance. I would recomend this meter.

    ✔ Yes, I recommend this product.

  7. Azul


    Nice ampmeter…………………………………

    ✔ Yes, I recommend this product.

  8. johnnyj

    mfd range not right

    nice tool/,but the capacitance range is very inaccurate.
    800 mfd cap. read 180 180 mfd, red 60.

    amprobe was rated #1, been using this product for 50 + years.

    ✔ Yes, I recommend this product.

  9. jsmith

    love this little tester rugged and durable had it 10 years now

    this tester has always been a great tool in my arsenal of gadgets for the hvac field. had an analog amprobe before this one and it was a good companion as well but the test leads failed so I updated and im happy I did

    ✔ Yes, I recommend this product.

  10. Rajdkmohan

    Very easy to use

    One of the easiest amprobe to use.very versatile and rugged. I’ve had mine for 2 yrs. Now. I’ve dropped it countless time and it still works.its very economical.

    ✔ Yes, I recommend this product.

Add a review

Your email address will not be published. Required fields are marked *

The maximum upload file size: 700 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here