Description
Amprobe’s new ACD-20SW Swivel™ Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places.
Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600 V safety ratings make this clamp on meter something you should swivel to see.
Specifications
TRMS |
– |
– |
– |
• |
• |
– |
AC Current |
40.00 A , 400.0 A |
+/- (2.0 % rdg + 10 dgts)
50 Hz → 60 Hz |
AC Voltage |
4.000 V, 40.00 V, 400.0 V, 600.0 V |
+/- (1.2% rdg + 8 dgts)
→ 400 V Hz |
DC Voltage |
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600.0 V |
+/- (0.5% rdg + 2 dgts) |
Resistance |
400.0 ?, 4.000 k?, 40.00 k?, 400.0 k?, 4.000 M?, 40.00 M? |
+/- (1.0% rdg + 4 dgts) at 400 ? → 400 k? ranges |
Capacitance |
– |
4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF |
– |
4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF |
+/- (3.0 % rdg + 15 dgts)
on 40 µF → 400 µF ranges |
Temperature |
– |
-30 °F → 400 °F |
-35 °C → 400 °C |
– |
-30 °F →400 °F, (-35 °C → 400 °C) |
+/- (1 % + 2 °F) -4 °F → 400 °F
+/- (1 % + 1 °C) 0 °C → 200 °C |
Diode test |
• |
– |
– |
– |
– |
– |
VolTect™ non-contact voltage detection |
70 V → 600 VAC (50 Hz → 60 Hz) |
– |
Backlight |
– |
– |
– |
• |
• |
– |
Accommodates conductors |
Up to 1.18″ (30 mm) in diameter |
Specifications |
Display: |
3¾ digit liquid crystal display (LCD) with a maximumreading of 3999 |
Polarity: |
Automatic, positive implied, negative polarityindication |
Overrange: |
(OL) or (-OL) is displayed |
Zero: |
Automatic |
Measurement rate: |
2 times per second, nominal |
Accuracy: |
Stated accuracy at 74°F ±8°F, <75% relativehumidity. |
Jaw opening capability: |
30mm (1.18 in) conductor. |
Power: |
1.5 volt battery x2, R03/SIZE AAA. |
DC volts ranges: |
400mV, 4V, 40V, 400V, 600V |
Accuracy: |
±(0.5% rdg + 2 dgts) |
AC Volts (50hz – 500hz) ranges: |
4V, 40V, 400V, 600V |
Accuracy: |
±(1.2% rdg + 5 dgts) ±(1.5% rdg + 5 dgts) on 600V range |
AC Current (50hz – 60hz) ranges: |
40A , 400A |
Accuracy: |
±(2.0% rdg + 6 dgts) 50 ~ 60Hz |
Resistance ranges: |
400O, 4kO, 40kO, 400kO, 4MO, 40MO |
Accuracy: |
±(1.0% rdg + 4 dgts) on 400O to 400kO ranges |
Accuracy: |
±(1.5% rdg + 4 dgts) on 4MOrange |
Accuracy: |
±(3.0% rdg + 5 dgts) on 40MO range |
Continuity range: |
400O |
Diode test current: |
1.2mA (approximate) |
Accuracy: |
±(3.0% rdg + 3 dgts) |
Non-contact voltage indicator: |
Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges. |
For complete specs please download the product datasheet under the “Resources” tab.
Videos
Swivel Clamp Meters
Measure in tight spots with Amprobe Swivel Clamp Meters.
SOSparky –
No more handstands at the panel!
The swivel clamp meter is an idea long overdue. I have stood on my head for the last time trying to take a reading without tickling the hot leads in a tight panel or crammed pull box.
The LCD read out is large and clear for the shadowy places we wind up and the clamp is agile enough to weave through a tangle of conductors of almost any size. Its also good for left or right sides when all the contractor gave you was the minimum 30″ wide clearance.
If I was adding anything, it would be a backlit LED or LCD readout and up it to 1000V capacity. Sometimes 600s aren’t 600!
✔ Yes, I recommend this product.
bbbob84 –
ACD-20SW Superior Amprobe Quality
Well engineered. Full of features. Suits my needs. Amprobe quality as always.
✔ Yes, I recommend this product.
Mln66 –
Simple to Use
Simple to use and fast. The swivel makes it easy to use.
✔ Yes, I recommend this product.