Home  |  Products  |  Clamp Meters  |  Swivel Clamps - Rotating head for easy display viewing  |  

Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™

Click here to watch video

Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™
Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™
Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™
Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™
Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™

Amprobe’s new ACD-20SW Swivel™ Clamp Meter features a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places.

Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600V safety ratings make this clamp on meter something you should swivel to see.


Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™ is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from ACD-20SW Superior Amprobe Quality Well engineered. Full of features. Suits my needs. Amprobe quality as always.
Date published: 2012-03-29
Rated 5 out of 5 by from Simple to Use Simple to use and fast. The swivel makes it easy to use.
Date published: 2012-03-29
Rated 5 out of 5 by from No more handstands at the panel! The swivel clamp meter is an idea long overdue. I have stood on my head for the last time trying to take a reading without tickling the hot leads in a tight panel or crammed pull box. The LCD read out is large and clear for the shadowy places we wind up and the clamp is agile enough to weave through a tangle of conductors of almost any size. Its also good for left or right sides when all the contractor gave you was the minimum 30" wide clearance. If I was adding anything, it would be a backlit LED or LCD readout and up it to 1000V capacity. Sometimes 600s aren't 600!
Date published: 2012-01-04
  • y_2017, m_9, d_24, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_73076, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • 180 degree rotating head for the perfect display viewing
  • Advanced VoltTect™ non-contact voltage detection
  • Slim jaw design with one hand operation
  • Measures AC current up to 400 AC A, AC/DC voltage up to 600V, resistance and capacitance
  • Audible continuity
  • Temperature measurement
  • Audible continuity
  • Auto power off
  • Auto and manual ranging respectively for quick checks and precise measurements
  • Data hold
  • Diode test
  • Accommodates conductors up to 1.18 (30mm) in diameter
  • Test leads, battery (installed), users manual, carrying case are included with the product
FEATURE ACD-20SW ACD-21SW ACD-21SWC* ACD-22SW ACD-23SW BEST ACCURACY
TRMS - - - -
AC Current 40.00 A , 400.0 A +/- (2.0 % rdg + 10 dgts)
50 Hz → 60 Hz
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600.0 V +/- (1.2% rdg + 8 dgts)
→ 400 V Hz
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600.0 V +/- (0.5% rdg + 2 dgts)
Resistance 400.0 ?, 4.000 k?, 40.00 k?, 400.0 k?, 4.000 M?, 40.00 M? +/- (1.0% rdg + 4 dgts) at 400 ? → 400 k? ranges
Capacitance - 4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF
- 4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF
+/- (3.0 % rdg + 15 dgts)
on 40 µF → 400 µF ranges
Temperature - -30 °F → 400 °F -35 °C → 400 °C - -30 °F →400 °F, (-35 °C → 400 °C) +/- (1 % + 2 °F) -4 °F → 400 °F
+/- (1 % + 1 °C) 0 °C → 200 °C
Diode test - - - - -
VolTect™ non-contact voltage detection 70 V → 600 VAC (50 Hz → 60 Hz) -
Backlight - - - -
Accommodates conductors Up to 1.18" (30 mm) in diameter

Specifications
Display: 3¾ digit liquid crystal display (LCD) with a maximumreading of 3999
Polarity: Automatic, positive implied, negative polarityindication
Overrange: (OL) or (-OL) is displayed
Zero: Automatic
Measurement rate: 2 times per second, nominal
Accuracy: Stated accuracy at 74°F ±8°F, <75% relativehumidity.
Jaw opening capability: 30mm (1.18 in) conductor.
Power: 1.5 volt battery x2, R03/SIZE AAA.
DC volts ranges: 400mV, 4V, 40V, 400V, 600V
Accuracy: ±(0.5% rdg + 2 dgts)
AC Volts (50hz - 500hz) ranges: 4V, 40V, 400V, 600V
Accuracy: ±(1.2% rdg + 5 dgts) ±(1.5% rdg + 5 dgts) on 600V range
AC Current (50hz - 60hz) ranges: 40A , 400A
Accuracy: ±(2.0% rdg + 6 dgts) 50 ~ 60Hz
Resistance ranges: 400O, 4kO, 40kO, 400kO, 4MO, 40MO
Accuracy: ±(1.0% rdg + 4 dgts) on 400O to 400kO ranges
Accuracy: ±(1.5% rdg + 4 dgts) on 4MOrange
Accuracy: ±(3.0% rdg + 5 dgts) on 40MO range
Continuity range: 400O
Diode test current: 1.2mA (approximate)
Accuracy: ±(3.0% rdg + 3 dgts)
Non-contact voltage indicator: Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges.



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
ACD-20SW
  • 180 degree rotating head for the perfect display viewing
  • Advanced VoltTect non-contact voltage detection
  • Slim jaw design with one hand operation
Included Accessories:   Test leads, battery (installed), users manual, carrying case

Test LeadsBuy it
DL248DAmprobe DL248D

OtherBuy it
ELS2AELS2A AC Current Clamp Accessory
           
Related Products

3 reviews
 
 Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™ »

8 reviews
 
 Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™ »

4 reviews
 
 Amprobe ACD-22SW True-rms Swivel™ Clamp Meter with VolTect™ »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe