Amprobe PRM-4 Phase Sequence and Motor Rotation Tester
- Identifies 3-phase sequence and open phase check
- Motor shaft rotation indication protected by CAT III circuitry
- 3 phase to phase input voltage, 100V ac to 600V ac max
- Supplied with three CAT III rated color coded large alligator clips and test leads
- 45 to 70 Hz frequency
||0 °C to 40 °C at <80 % R.H.
||Single standard 9 V battery
||Approximately 200 hours typical with carbon-zinc battery
|Low battery indication
||The BATT LED does not come ON when TEST button is pressed
|Dimensions (H x W x D)
||153 mm x 72 mm x 35 mm (6.02 x 2.83 x 1.37 in)
||Approximately 218 g (7 oz) including battery.
||2000 m (6561 ft.)
||600 V AC
||Conforms to EN61010-1:2001
CAT III 600V, Pollution degree 2, Class 2
CSA 22.2 -1010-1
||Conforms to EN61326-1. This product complies with requirements of the following European Community Directives: 89/ 336/ EEC (Electromagnetic Compatibility) and 73/ 23/ EEC (Low Voltage) as amended by 93/ 68/ EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equipment may disturb the measurement circuit. Measuring instruments will also respond to unwanted signals that may be present within the measurement circuit. Users should exercise care and take appropriate precautions to avoid misleading results when making measurements in the presence of electronic interference.
||3 phase to phase inputs 100 V AC to 600 V AC max.
||45 to 70 Hz
||10 minutes ON maximum at 600 V AC
10 minutes OFF minimum at 600 V AC
||Approx. 7 mA per phase of AC power source
||10 minutes ON maximum
10 minutes OFF minimum.
|Motor rotation tester field
||14 mA of 9 V battery
- Test leads (red, green, and blue)
- Alligator clips (TL-PRM-4)
- Soft vinyl case
- 9 V Battery