amprobe
Australia [Change Country]
Home  |  Products  |  HVAC Tools  |  Gas Leak  |  
Contact usRefer this page

Amprobe GSD600 Gas Leak Detector

Click here to watch video

Amprobe GSD600 Gas Leak Detector
Amprobe GSD600 Gas Leak Detector

The Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected. The frequency of the beep coincides with the concentration of the gas. The LEDs display the level of gas present in an area or room. Pinpoint gas leaks for closed piping systems. Use the mute function in quiet work areas and utilize the LED displays. Or a standard earphone jack for hearing the meter in loud environments.


  • Detects Methane and Propane gas
  • Quickly identifies and pinpoints gas leaks
  • Automatic calibration feature
  • 5 level LED alarm: >40, >80, >160, >320, and >640 ppm
  • Built-in earphone jack with mute function (earphone not included)
  • Flexible probe to access difficult measurement areas
  • Auto Power Off
Sensor:    Semiconductor
Response Time:    < 10 seconds
Warm Up Time:    < 60 seconds
Auto Power Off:    10 minutes after last key pressure.
Power Supply:    (4) AA batteries; 9V power adaptor (plug specifications: Outer diameter:3.5mm; Inner diameter:
...    1.35mm; Center positive, 500mA maximum). (9V power adaptor not included)
Probe Length:    447 mm (17.6 inches)
Range:    Methane 40 to 640 ppm Propane 35 to 580 ppm
Sensitivity:    35ppm (Propane)
Advantage:    Fast response & High Methane sensitivity
Model NameDescription
GSD600
  • Detects Methane and Propane gas
  • Quickly identifies and pinpoints gas leaks
  • Automatic calibration feature
  • 5 level LED alarm: >40, >80, >160, >320, and >640 ppm
Included Accessories:   Battery (installed), carrying case, users manual
Search
Find Resources
Find Products

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe