Amprobe MO-100 Milliohm Meter

Amprobe MO-100 Milliohm Meter

  • Accurate four terminal measurement down to 100µ ohms does not require test leads resistance compensation
  • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm
  • Measurement precision with three test currents with over-temperature protection
  • Protection against inadvertent connection to overvoltage
  • Large LCD
  • Potential lead resistance, current lead resistance checks
  • Auto-hold and auto-off features
  • Lightweight, robust compact.
  • Indicates measurement errors due to temperature or connection problems
  • “O-Ring sealed enclosure
  • Battery powered
  • IEC / EN 61010-1
  • Test leads, Instruction manual, Shoulder belt, 1.5V(AA) x 8 Batteries

 

(2 customer reviews)

SKU: 3474954 Category:

Product Highlights

Diagnose potential failure with the MO-100, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

Specifications

FEATURE MO-100
Measuring range 0 → 200.0 mO in steps of 100 µO
0 → 2000 mO in steps of 1 mO
0 → 20.00 O in steps of 10 mO
0 → 200.0 O in steps of 100 mO
0 → 2000 O in steps of 1 O
Test current 1 mA (2000 O range)
10 mA (20 O / 200 O range)
100 mA (200 mO / 2000 mO range)
Specifications
Measuring ranges: 0-200.0m ohms in steps of 100µohm
0-2000m ohms in steps of 1m ohm
0-20.00 ohms in steps of 10m ohm
0-200.0 ohms in steps of 100m ohm
0-2000 ohms in steps of 1 ohm
Accuracy: ±0.5% of reading ±2 digits over the operating temperature range, -15°C to 55°C (5°F to 131°F), with the supplied test leads
Test current: 1mA =>2000 ohms range
10mA =>200/ 20 ohms range
100mA =>2000m / 200m ohm range
Accuracy: ±0.1%
Protection fuses: Mains = 0.5A, HBC, 5 x 20mm, DIN
Current = 0.5A, HBC, 5 x 20mm, DIN
Voltage = 0.5A, HBC, 5 x 20mm, DIN
Maximum output
Voltage (C1-C2) 20V

For complete specs please download the product datasheet under the “Resources” tab.

Videos

MO-100 Milliohmmeter

Diagnose motor, generator and transformer problems with the MO-100 Milliohmmeter.

What’s Included

Description
  • Accurate four terminal measurement down to 100µ ohms does not require test leads resistance compensation
  • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm
  • Measurement precision with three test currents with over-temperature protection

Included Accessories:   Users manual, test leads, batteries (installed)

Resources

Data Sheet »
Product Manual »

2 reviews for Amprobe MO-100 Milliohm Meter

  1. WuzzellJ

    Very useful in the HVAC/R Trade.

    I used this tool to prevent major calls in the middle of the night. Its helps me generate sales to customers. I show them that their compresors, motors, transformers are about to go out, and most of them want to change the bad part with in a day or two. Of course, I had customers who have wished to listen to me.

    ✔ Yes, I recommend this product.

  2. Zapman

    Excellent Value

    This meter enabled us to isolate and identify a defective appliance cord that was causing nuisance CAFCI trips. Isolation did not work, failures were minimum 4 days apart.
    Moving the load stopped the failures (cord flexed differently). This is now a new weapon in our troubleshooting arsenal.

    ✔ Yes, I recommend this product.

Add a review

Your email address will not be published.