Amprobe 15XP-B Digital Multimeter VolTect trade, Non-Contact Voltage Detection

Amprobe 15XP-B Digital Multimeter VolTect trade; Non-Contact Voltage Detection

  • The 15XP-B is the right choice for electronics engineers, technicians and field service
  • Autoranging display for faster measurements
  • TTL logic test for digital circuits
  • Integrated tilt stand for easy bench use
  • Diode test for component level troubleshooting
  • Data hold freezes display to “hold” measurement reading
  • 600V AC / 600V DC—highest voltage rating in this size of meter
  • Special 2000 MΩ measurement range

 

SKU: 3534088 Category:

Product Highlights

Amprobe 15XP-B is the right choice for electronics engineers and field service technicians, featuring TTL logic test for digital circuits, diode test for component level troubleshooting, a special 2000MΩ measurement range, and an integrated tilt stand for convenience on the bench.

Specifications

FEATURE 15XP-B
DC Voltage 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V
AC Voltage 200.0 mV, 2.000 V, 20.00 V, 200.0 V, 600 V
Current AC/DC 200.0 µA, 2.000 mA, 20.00 mA, 200.0 mA, 2 A
Resistance 200.0 , 2.000 k, 20.00 k, 200.0 k, 2.000 M, 20.00 M, 2000 M
Continuity beeper
VolTect™ Non-Contact Voltage Detection 70 VAC → 600 VAC (50 Hz → 60 Hz)
Capacitance
Frequency
Temperature
Logic test TTL, 20 MHz
Battery test
Specifications
Display: 3-1/2 digit liquid crystal display (LCD) with a maximum reading of 1999
Polarity: Automatic, positive implied, negative polarity indication
Over-range: (OL) or (-OL) is displayed
Zero: Automatic
Low battery indication: The + is displayed when the battery voltage drops below the operating level
Auto power off: Approx. 10 minutes
Measurement rate: 2 times per second, nominal
Operating environment: 0 °C to 50 °C at <70 % R.H.
Accuracy: Stated accuracy at 23 °C ± 5 °C, <75 % relative humidity
Power: Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
DC Volt ranges: 200 mV, 2 V, 20 V, 200 V, 600 V
Accuracy: ± (0.5 % rdg + 1 dgt)
AC Volts (45 Hz to 500 Hz) Ranges: 200 mV 2 V, 20 V, 200 V, 600 V
Accuracy: ± (1.5 % rdg + 5 dgts)
DC Current ranges: 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.0 % rdg + 2 dgt)
2 A, Accuracy ± (2.0 % rdg + 3 dgts)
AC Current (45 Hz to 500 Hz) ranges: 200 µA, 2000 µA, 20 mA, 200 mA, Accuracy: ± (1.5 % rdg + 5 dgts)
2 A, Accuracy ± (2.5 % rdg + 5 dgts)
Resistance: 200  , 2 k , 20 k , 200 k , 2 M ± (1.0 % rdg + 4 dgts)
Resistance: 2000 MO ± {5.0 % (rdg -10 dgts) +20 dgt}
Continuity audible indication: Less than 25
Diode test current: 1.2 mA (approximate) ±(1.5 % rdg + 3 dgts)
Logic test: TTL
Non-contact voltage indicator: Sense voltage 70 V to 600 V ac (50 Hz to 60 Hz) beeper chirps and big bright red LED comes on, works on all ranges

For complete specs please download the product datasheet under the “Resources” tab.

Resources

Data Sheet »
Product Manual »

Reviews

There are no reviews yet.

Be the first to review “Amprobe 15XP-B Digital Multimeter VolTect trade, Non-Contact Voltage Detection”

Your email address will not be published.