amprobe
U.S. [Visit Amprobe Europe]
Home  |  Products  |  Electrical Testers  |  Circuit-Test-and-Analysis - Receptacles, Breakers and LAN  |  
Contact usRefer this page

INSP-3 Wiring Inspector Circuit Tester


Click here to watch video
INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester

The Amprobe INSP-3, wiring inspector is a rugged circuit tester designed to test whether a building’s wiring is in compliance with electrical code in seconds, especially voltage drop under load. Without scrolling or switching screens, you can quickly identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system. The flashing screen on this circuit tester will clearly indicate incorrect wiring or failures and it won’t trip circuit breakers or blow fuses during the test.


 
INSP-3 Wiring Inspector Circuit Tester 4.7 5 21 21
Problems with Arc fault testing.... I have gone thru three testers in three days. They've been good with getting me replacements. But when I get a new one I'll do three to four arc fault tests and it comes up with "internal fault contact factory" on the display. Also GFCI trip gets stuck, so every time you plug it in it'll trip the GFCI. If all your doing is testing for voltage under load, voltage drop, or ground resistance. Then this may be a good model for you... If your looking for a arc fault or GFCI tester. This may not be the model for you. February 12, 2013
Extra income Home inspectors ruin our industry....give our customers a real break and back it with facts.....this is the meter to do it.... Highly recommend and will be purchasing soon, after a trial from my supply house. The meter performs tests that we routinely don't and will add to your treasure trove of additional income producing tools May 24, 2012
great tool Just the name Amprobe is enough to know its built to last and be used for a long time.Great tool April 12, 2012
fast fast and accurate. I've used it on a couple of jobs and it came in very handy. April 12, 2012
Time Saver What a great tool. Saves me time, money and frustration. April 12, 2012
Must have tool I was have electrical problem with one of my plugs. A friend of mine who is an electrician over heard me talking about it. He went and get his tool an plug it into the plug and told me that I have the wrong fuse in. This just tell me that if you have the right tool you can save your self time and money. This is a great tool to have and keep. March 29, 2012
This circuit tester was one of the best product used Are you are looking for a product that is easy to use, accurate each and every time, then look no further than the Wiring Inspector Circuit Tester. I have had not found a product that can match this tester. March 29, 2012
INSP-3 Great item, just installed a ceiling fan and this item was very useful in identifing in the amount of current growing through the room in order to prevent an overload. March 29, 2012
2 next>>
  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
  • Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers:
  • Faulty splices and connections
  • Incorrect wiring
  • Undersized wiring
  • Faulty GFCIs,
  • Faulty or incorrectly wired AFCIs
  • Incorrect line voltage
  • Poor ground quality
  • User selectable 0, 10, 15 and 20 amps loads to verify performance of the electrical system
  • Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
  • Will not trip circuit breakers or blow fuses during the test
  • Tests GFCI and AFCI operations
  • Check ground quality for safety and ability to support sensitive electronic equipment
  • Measure fault currents
  • Save money and time by eliminating guess work
  • NOTE: The INSP-3 does not check the condition of wiring insulation.
FEATURE INSP-3 Best Accuracy
Load: Constant 10, 15 or 20 AMP simulation regardless of line voltage -
Operating voltage: 95 VAC → 140 VAC +/- 2 % + 2 digits
GFI trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD -
AFCI trip: Up to 8, 120 AMP pulses within 1/2 second period -

Specifications
Load: Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage
Operating voltage: 95-140 VAC +/-2%, +/- 2 digits
GFI trip: 6.0 mA nominal to trip GFI, 30 mA to trip RCD
AFCI trip: Up to 8, 120 AMP pulses within 1/2 second period



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescription
INSP-3
  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
Included Accessories:   Power cord,9 V alkaline battery (installed),users manual, carrying case
Search
Find Resources
Find Products
Follow us        Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2013 Amprobe