Home  |  Products  |  Wire Tracers, Underground Cable and Cable Locators  |  AT-7000 Advanced Wire Tracers  |  

Amprobe AT-7020 Advanced Wire Tracer Kit

Click here to watch video

AT-7000 Advanced Wire Tracer
AT-7000 Advanced Wire Tracer
AT-7000-R Wire Tracer Receiver at different angles
AT-7000 tracing wire in junction box
AT-7020 Advanced Wire Tracer Kit contents - including hard case, test leads, receiver, transmitter

The AT-7020 Advanced Wire Tracer kit includes the AT-7000-R Receiver and the AT-7000-T Transmitter. The Receiver includes Amprobe’s patented Smart Sensor feature to instantly display the location and orientation of energized wires in walls, floors, and ceilings. You can clearly see the direction of the wire on the large, bright TFT LCD full color display. In hard-to-reach areas, you can use the Receiver’s Tip Sensor to trace wires in corners, tight spaces and junction boxes. The Transmitter offers two automatically-selected frequency modes for optimal tracing on energized and de-energized circuits, and three power modes (high, low, clamp) for a variety of environments. The breaker mode’s Scan and Locate feature identifies the one correct breaker or fuse with the highest recorded signal, thus eliminating the confusion of multiple false positives common with older technology tracing tools. So whether you’re a novice user or an expert, this Amprobe circuit tracer kit will help you get the job done fast.

  • Locates and traces energized and de-energized wires and breakers in floors, walls, and ceilings
  • Pinpoints shorts and opens
  • Traces AC/DC Circuits from 0-600 V
  • Features three power modes
    • "High" power mode for normal circuits
    • "Low" power mode for precision tracing in difficult areas
    • Clamp power mode provides a boosted induction signal via the optional signal clamp
  • Offers two output frequency modes for optimal tracing
    • 6 kHz for energized circuits
    • 33 kHz for de-energized circuits
  • Provides embedded help screens to simplify setup
  • Comes with custom Amprobe hard carrying case, test leads, and accessories
  • Compatible with optional Signal Booster Rechargeable Battery Pack (BR-7000-T), Signal Clamp (SC-7000) clamp-on attachment, and TIC 410A Hot Stick attachment to extend your reach
Features AT-7020 kit AT-7030 kit
Traces energized and de-energized wires
Locates energized and de-energized breakers
Pinpoints opens and shorts
Traces AC/DC circuits 0-600 V
Three power modes
Two frequency modes for optimal tracing
Signal Clamp (SC-7000) optional

Kit Contains AT-7020 kit AT-7030 kit
AT-7000-R Receiver
AT-7000-T Transmitter
TL-7000 Test Leads
CC-7000 Hard Carrying Case
SC-7000 Signal Clamp optional
HS-1 Hanger optional
Battery Charger (3)
AA Batteries (10)
Rechargeable AA Batteries (10)
User Manual
Model NameDescriptionBuy it
AMP AT-7020

Amprobe AT-7020 Advanced Wire Tracer Kit

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints opens and shorts
  • High resolution 3.5" TFT LCD Color Display
  • Three Power modes
    • "High" power mode for normal circuits
    • "Low" power mode for precision tracing in difficult areas
    • "Clamp" power mode provides a boosted signal using signal clamp
  • Two automatically selected frequency modes for optimal tracing on energized and de-energized circuits
  • Embedded help screens make set-up easy and error free

Included accesories: AT-7000-R Reciever, AT-7000-T Transmitter, TL-7000 Test Leads, CC-7000 Hard Carrying Case


CasesBuy it
CC-7000 Experience this durable hard carrying case from Amprobe. Protect and hold the AT-7000 Advanced Wire Tracer in place when not in use with this case.

Test LeadsBuy it
TL-7000 Experience these high quality test leads from Amprobe. Use the TL-7000 Test Lead Set with the AT-7000 Advanced Wire Tracer

OtherBuy it
BR-7000C battery charger, wire tracer Experience this battery charger from Amprobe. Use this BR-7000C Battery Charge with the AT-7000-T rechargeable batteries.
BR-7000-T Experience this signal booster rechargeable battery pack from Amprobe. Use it to increase signal transmission power when using the AT-7000-T Transmitter.
HS-1 Experience this hanging strap accessory from Amprobe. Use the HS-1 to hang, place on your belt or stand up your digital multimeter or AT-7000-T transmitter.
SC-7000 Experience this signal clamp from Amprobe. Use the SC-7000 Signal Clamp with the AT-7000-T to induce signal into wires when there is no access to bare conductors.
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe