Home  |  Products  |  Wire Tracers, Underground Cable and Cable Locators  |  Advanced Wire Tracers  |  

Amprobe AT-6010 Advanced Wire Tracer Kit

Click here to watch video CE Certification KCC Certification C-tik Certification CSA Certification CAT III 600 V Certification

Amprobe AT-6010 Advanced Wire Tracer Kit
Amprobe AT-6010 Advanced Wire Tracer Kit
Amprobe AT-6010 Advanced Wire Tracer Kit
Amprobe AT-6010 Advanced Wire Tracer Kit
Amprobe AT-6010 Advanced Wire Tracer Kit

Easily and accurately locate wires, breakers, and fuses with the AT-6010 Advanced Wire Tracer. When the Transmitter is connected to the circuit (Energized or De-energized, up to 600 V AC/DC in Category I through Category III electrical environments), the Receiver easily detects the transmitted signal in the wires or cables behind walls, ceilings and floors. Work safely on energized circuits without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage. The AT-6010 can be combined with the CT-400 Signal Clamp (optional accessory) for applications where access to circuit contacts is limited or where users are not able to connect the Transmitter to the circuit through test leads.

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints shorts and opens
  • High resolution 2.5"" TFT LCD black & white display
  • Simple one button Transmitter operation
  • Two Transmitter signal modes
    1. "High Signal" mode for normal circuits
    2. "Loop" mode for closed loop de-energized circuits
  • Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
  • Comes with custom Amprobe soft carrying case, test leads and accessories
  • Rated CAT III 600 V for work directly on an energized circuit without the need to take equipment offline
  • Compatible with optional Signal Clamp (CT-400) clamp-on attachment
Features AT-6010-R Receiver AT-6010-T Transmitter
Measurement category CAT III 600 V
Operating voltage/current 0 to 600 V
Operating frequency Energized: 6.25 kHz
Hazardous voltage detection N/A > 30 V AC/DC
Signal indications Numeric bar graph display and audible beep LEDs
Response time Tip Sensor (Energized/De-energized): 500 ms
Battery voltage monitoring: 5 sec
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Current output of signal (typical) N/A Energized circuit:
HI mode: 60 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
Loop mode: 160 mA RMS
Signal voltage output (nominal) N/A De-energized circuit:
HIGH: 33 V RMS, 140 Vp-p
With CT-400:
Loop model:
31 V RMS, 120 Vp-p
Range detection (open air) Tip Sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip Sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)
N/A
Display size LCD 2.5 in (6.35 cm) N/A
Display dimensions (W x H) 1.45 x 1.93 in
(36.72 x 48.96 mm)
N/A
Display type Segment LCD LEDs
Display color Black and white Operating mode LEDs: red
Battery status LED: red
Booting time < 3 sec < 2 sec
Backlight Yes N/A
Operating temperature -4 °F to 122 °F (-20 °C to 50 °C)
Operating humidity 45%: -4 °F to <50 °F (-20 °C to <10 °C)
95%: 50 °F to <86 °F (10 °C to <30 °C)
75%: 86 °F to <104 °F (30 °C to <40 °C)
45%: 104 °F to 122 °F (40 °C to 50 °C)
Storage temperature and humidity -4 °F to 158 °F (-20 °C to 70 °C), <95% RH
Operating altitude 0 to 6561 ft (2000 m)
Transient protection N/A 6.00 kV (1.2/50μS surge)
Pollution degree 2
IP rating IP 52 IP 40
Drop test 3.28 ft (1 m)
Power supply 4 x AA (alkaline) 8 x AA (alkaline)
Power consumption (typical) 70 mA Hi mode: 70 mA
Loop mode with Clamp: 90 mA
Consumption without signal transmission: 10 mA
Battery life Approx. 25 h Hi mode: approx. 25 h
Loop mode: approx. 18 h
Low battery indication Yes
Fuse N/A 1.6 A, 700 V, fast-acting,
Ø 6x32mm
Dimensions (L x W x H) Approx. 7.2 x 2.95 x 1.69 in
(183 x 75 x 43 mm)
Approx. 7.2 x 3.66 x 1.97 in
(183 x 93 x 50 mm)
Weight Approx. 0.6 lb (0.27 kg) Approx. 1.25 lb (0.57 kg)
Certifications

Refer to user manual for accessory specifications


Kit Contains AT-6010
AT-6010-R Receiver
AT-6010-T Transmitter
TL-6000-INTL Test lead and accessory kit*
CC-6010 Soft carrying case
User Manual
Quick Reference Guide
1.5 V AA (IEC LR6) Battery 12

* TL-6000-INTL test lead and accessory kit includes:

  • 2 x 1 m test leads (red, black)
  • 1 x 7 m test lead (green)
  • 2 x Alligator clips (red, black)
  • 2 x Outlet blade adapter (red, black)
  • 2 x Outlet round adapter (red, black)

Optional Accessories
ADPTR-SCT Socket adapter
HS-1 Magnetic hanger
TL-7000-25M Test lead
CT-400 Signal clamp
Model NameDescriptionBuy it
AT-6010

Amprobe AT-6010 Advanced Wire Tracer Kit

Included Accessories: AT-6010-R Receiver, AT-6010-T Transmitter, CC-6010 Soft Carrying Case, TL-6000-INTL Test Lead and Accessory Kit (2 x 1 m test leads, 1 x 7 m test lead, 2 x alligator clips, 2 x outlet blade adapters, 2 x outlet round adapters), 12 x AA Batteries, User Manual, Quick Reference Guide


Test LeadsBuy it
AMP TL-6000-INTLUse the TL-6000-INTL Test Lead and Accessory Kit with the AT-6010 Advanced Wire Tracer.

Included Accessories: 2 x 1 m test leads, 1 x 7 m test lead, 2 x alligator clips, 2 x outlet blade adapters, 2 x outlet round adapters
 

Clamp on AttachmentsBuy it
AMP CT-400Experience this signal clamp from Amprobe. Use the CT-400 Signal Clamp with the AT-6000-T to induce signal into wires when there is no access to bare conductors.

OtherBuy it
HS-1 Experience this hanging strap accessory from Amprobe. Use the HS-1 to hang, place on your belt or stand up your digital multimeter or Advanced Wire Tracer Transmitter.
AMP ADPTR-SCT

Amprobe Socket-Check Adapter
Included Accessories: User Manual

           
Related Products

 Write the first review
 
 Amprobe AT-6020 Advanced Wire Tracer Kit »

 Write the first review
 
 Amprobe AT-6030 Advanced Wire Tracer Kit »

 Write the first review
 
 AMP CT-400 »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2019 Amprobe