Home  |  Products  |  Wire Tracers, Underground Cable and Cable Locators  |  Wire Tracers  |  

Amprobe AT-4003-A Advanced Wire Tracer

Safety Recall: Amprobe is voluntarily recalling AT-4000 Series Wire tracers »

Click here to watch video

Amprobe AT-4003-A Advanced Wire Tracer
Amprobe AT-4003-A Advanced Wire Tracer
Amprobe AT-4003-A Advanced Wire Tracer
Amprobe AT-4003-A Advanced Wire Tracer
This wire tracer has all the features of the AT-4001-A plus the extra protection of a hard shell carrying case.

Use this electrical wire tracer for finding wires in walls, tracing energized wires and locating breakers without interrupting power. Our best wire tracer, you can use it to find energized and de-energized wires, including broken and disconnected wires, and pinpoint shorts and ground faults.
  • Locates and traces energized and de-energized wires in walls, floors, plastic conduit, cable shields and computer cables, without interrupting power
  • Includes one universal transmitter that automatically switches to work with either energized or de-energized systems
  • Receiver is not position sensitive so it doesn't require rotation for accurate readings
  • Pinpoints shorts, breakers, neutrals, broken wires, and ground lines
  • Does not interfere with sensitive electronic equipment, such as in hospitals and data centers
  • Offers precise sensitivity adjustment
  • Includes hard shell carrying case – CC-AT 4000, R-4000 receiver, transmitter T-4000-A, 110V pigtail – banana plug cord set C2901, alligator clips – banana plug cord set C2902, grounding test lead 25' (7.6m) MTL-G, alligator clip for ground lead VRC-320, required batteries and user's manual
FEATURE AT-4001-A AT-4003-A AT-4004-A AT-4005-A
Traces energized wires without power interruption. Locates breakers without power interruption.
Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts and ground faults.
Traces unenergized open wires (broken or disconnected wire). Pinpoints place where wire is broken.
Supplied with clamp-on attachment to inject signal without making contact with bare wire. - -
Supplied with battery booster to strengthen signal for open tracing. - - -

KIT CONTAINS: AT-4001-A AT-4003-A AT-4004-A AT-4005-A
Carrying case Soft SV-1000 Hard CC-AT-4000 Hard CC-AT-4000 Hard CC-AT-4000
Receiver R-4000
Transmitter T-4000-A
110V Pigtail - banana plug cord set C2901
Alligator clip – banana plug cord set C2902
Grounding test lead 25-ft. MTL-G
Alligator clip for ground lead VRC-320
Clamp-on transmitter accessory A2202 - -
Rechargeable battery pack B2024 - - -
Battery pack recharger B2025 - - -
Users manual

Transmitter operating voltage: 9-300V AC/DC
Operating frequency: 32.786kHz
Receiver short mode range: 20' in air from the traced wire under test conditions
Receiver open mode range: 12' in air from the traced wire under test conditions

For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
  • Supplied with Hard Carrying Case
  • Locates and traces wires in walls, floors, conduit, computer cables, etc.
  • Pinpoints shorts, ground faults and broken wires
  • Traces energized and non-energized (open, broken) wires
  • Precise sensitivity adjustment
Included Accessories:   Soft SV-1000 Carrying case, R-4000 Receiver, Transmitter T-4000-A, 110V Pigtail - Banana plug cord set C2901. Alligator clips - banana plug cord set C2902, Grounding test lead 25ft. MTL-G, Alligator clip for ground lead VRC-320, Users manual

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2019 Amprobe