Home  |  Products  |  HVAC Tools  |  Gas Leak Detectors  |  

Amprobe GSD600 Gas Leak Detector

Click here to watch video

Amprobe GSD600 Gas Leak Detector
Amprobe GSD600 Gas Leak Detector

The Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected. The frequency of the beep coincides with the concentration of the gas. The LEDs display the level of gas present in an area or room. Pinpoint gas leaks for closed piping systems. Use the mute function in quiet work areas and utilize the LED displays. Or a standard earphone jack for hearing the meter in loud environments.

Amprobe GSD600 Gas Leak Detector is rated 4.6 out of 5 by 17.
Rated 4 out of 5 by from Nice but may be too sensative Works well but I have had some fairly large leak indications that turned out NOT to be a leak. Be careful before you make a ruling.
Date published: 2017-10-29
Rated 5 out of 5 by from Great tool Every time I've used this tool I've found the leak in record time. Fellow workers have used it and love it so much they're going to purchase one too.
Date published: 2017-10-05
Rated 4 out of 5 by from It's a nice product Have not had a chance to use it - but very shortly I hope.....
Date published: 2017-09-03
Rated 5 out of 5 by from Does what it's supposed to do I bought the GSD 600 to use primarily to diagnose a propane leak in my travel trailer. Although I detected the gas odorant by smell, I was not able to find the leak using a soap solution. The GSD 600 found it easily...it was the burner valve on the hot water heater. After replacing the valve, it was easy to check my work using the GSD 600 to make sure there was no further leak detected. The device is easy to use and appears to provide reliable and repeatable readings. Recommended.
Date published: 2017-08-07
Rated 5 out of 5 by from Just what I needed I did a substantial amount of research before purchasing this meter and what it came down to was that this meter only detected 2 combustible gases methane and propane. Several other detectors I considered detected a laundry list of gasses. Since I only want to test for gas leaks and not refrigerants, paint thinner, halon etc. I chose this detector. If I could get one at this price that told me what gas it was detecting I would have gone there but those are over a thousand bucks. I used it to check an oil furnace and it detected the combustion gasses in the flue.
Date published: 2016-08-06
Rated 4 out of 5 by from Appears to do what it says have only used it twice & both times it found location of sewer gas leakage
Date published: 2016-02-24
Rated 4 out of 5 by from Short on Necessary and Useful Instructions The unit is lacking a comprehensive and useful set of instructions. There is nothing about Natural Gas, which can be detected with the GSD600 because Methane is a major component. Doesn't anyone at Amprobe know anything about Natural Gas? There is Zero information about it and no guide to the levels of gas or what they mean. Do we run out of the room when levels reach 320 or 640? How can you not include those important instructions?! Shame on Amprobe. The unit works, but I'm not sure what I'm reading.
Date published: 2016-02-18
Rated 5 out of 5 by from Nice product for Locating Natural Gas leaks. Just need to wait for the Ready light and it works great. Shows digital steps for concentration. A solid dependable product.
Date published: 2015-12-22
  • y_2017, m_12, d_9, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_US, sid_73243, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Detects methane and propane gas
  • Quickly identifies and pinpoints gas leaks
  • Automatic calibration feature
  • 5 level LED alarm: >40, >80, >160, >320, and >640 ppm
  • Built-in earphone jack with mute function (earphone not included)
  • Flexible probe to access difficult measurement areas
  • Auto power off
Feature Range
Methane 40 ppm → 640 ppm
Propane 35 ppm → 580 ppm
Sensitivity 35 ppm (propane)

Sensor: Semiconductor
Response time: < 10 seconds
Warm up time: < 60 seconds
Auto power off: 10 minutes after last key pressure.
Power supply: (4) AA batteries; 9V power adaptor (plug specifications: Outer diameter:3.5mm; Inner diameter:1.35mm; Center positive, 500mA maximum). (9V power adaptor not included)
Probe length: 447 mm (17.6 inches)
Range: Methane 40 to 640 ppm; Propane 35 to 580 ppm
Sensitivity: 35ppm (Propane)
Advantage: Fast response & high methane sensitivity

For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
  • Detects Methane and Propane gas
  • Quickly identifies and pinpoints gas leaks
  • Automatic calibration feature
  • 5 level LED alarm: >40, >80, >160, >320, and >640 ppm
Included Accessories:   Battery (installed), carrying case, users manual

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe