amprobe
U.S. [Visit Amprobe Europe]
Home  |  Products  |  Environmental Test  |  Light  |  
Contact usRefer this page

LT-10 Lamp Tester


Click here to watch video
LT-10 Lamp Tester
LT-10 Lamp Tester
LT-10 Lamp Tester
LT-10 Lamp Tester
LT-10 Lamp Tester
The Amprobe LT-10 Lamp Tester takes the guess work out of troubleshooting fluorescent light fixtures, saving you time and money. This 3-in-1 tool tests the light bulb, pins, and voltage so you can tell whether fluorescent light bulbs are working before you install or remove them. The intuitive one-button operation, 48" removable and retractable antenna, VolTect™ non-contact voltage detection, and ultra-compact design, makes the LT-10 Lamp Tester the right tool for electrical and facilities maintenance applications.

       
LT-10 Lamp Tester 2 5 1 1
Far too delicate. You feel like is going to break in any second. Not for heavy duty work. November 4, 2014
1-1 of 1
  • Tests whether fluorescent lamps and light bulbs are operational prior to installation or removal
  • Features built-in VolTect alert to verify voltage presence and eliminate the need to carry a separate voltage detector
  • Offers single-handed, one-button operation for all lamp tests
  • Provides a pin test to check the continuity of the bulb’s electrodes
  • Features ultra-compact design for easy portability
  • Includes a 48 removable, fully retractable antenna to test lights without climbing a ladder
  • Emits visual and audible alerts for pin and voltage test functions
  • Works with all fluorescent light bulbs: T2, T4, T5, T8, T9, T10, T12
  • Includes 48 antenna, adaptor plate, users manual, battery and carrying case
Specifications
Compatible lamps T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage Approximately 3 kV / 280 kHz
Field strength Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length 48"
Filament test T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection AC 90 V to AC 600 V, 50/60 Hz
CAT II 300 V, CAT I 600 V
Supplied with 48" antenna, adaptor plate, users manual, battery and carrying case

Specifications Range
Compatible lamps T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage Approximately 3 kV / 280 kHz
Field strength Approximately 100 μV/m at 260 - 300 kHz
Maximum antenna length 48"
Filament test T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection AC 90 V to AC 600 V, 50/60 Hz
CAT II 300 V, CAT I 600 V
Non-contact voltage sensitivity with probe tip (typical) LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac
LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof 36"
Operating time One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement
Operating temperature -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature -10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude Up to 2000 meters
Battery One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life Up to 500 tests (Alkaline typically)
Dimensions (L x W x H) Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight Approximately 80 g (0.18 lb) with battery installed, excluding 48" antenna
Safety compliance IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
EMC compliance IEC 61326-1
Certification CSA and CE
Calibration NA
Warranty 1 Year
Model NameDescriptionBuy it
Amprobe LT-10 Lamp TesterTest to verify whether fluorescent bulbs are operational prior to installation or removal.
Included accessories: user's manual, carrying case, 9V alkaline battery, 48" antenna, adapter plate.
  
Search
Find Resources
Find Products
Related Products

3 reviews
 
 Amprobe AM-530 True-rms Electrical Contractor Multimeter »

1 review
 
 Amprobe LM-100 Light Meter »

3 reviews
 
 Amprobe LM-200 LED Light Meter »

Follow us   Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us © 1995 - 2014 Amprobe