Home  |  Products  |  Electrical Testers  |  Phase Sequence Testers   |  

Amprobe PRM-6 Phase Sequence and Motor Rotation Tester


Amprobe PRM-6 Phase Sequence and Motor Rotation Tester
Amprobe PRM-6 Phase Sequence and Motor Rotation Tester
Amprobe PRM-6 Phase Sequence and Motor Rotation Tester used with test leads to determine phase sequencing
Amprobe PRM-6 Phase Sequence and Motor Rotation Tester features non-contact wireless motor rotation detection on running motors
Non-contact voltage feature of Amprobe PRM-6 Phase Sequence and Motor Rotation Tester can be used when drive shaft not visible on motors

If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.

The PRM-6 Motor and Phase Rotation Tester can test the motor rotation of 3-phase systems, and verify 3-phase receptacle wiring and phase sequencing with test leads.

An additional advanced feature is wireless motor rotation detection, which senses motor rotation direction without use of test leads. This is particularly useful for fast-running motors when the motor rotation cannot be visually determined or when the drive shaft is not visible.

  • 3-phase wire sequence indication
  • Error displays (missing phase, one input connected to neutral or PE)
  • Non-contact, wireless motor rotation detection on running motors
  • Indicates motor rotation of disconnected motors when spinning the shaft by hand or other means
  • 3-phase to phase voltage up to 700 V
  • Clear backlit LCD display
  • Durable rubber casing for 3 ft. (1 m) drop proof protection
  • Safety: CAT IV 600 V
General Specifications
Operating temperature 0°C to 40°C (32°F to 104°C)
Operating altitude Up to 2000 m
Power AAA battery (2)
3 phase indication LCD
Dimensions (H x W x D) 5.43 in x 2.56 in x 1.3 in (13.7 cm x 6.5 cm x 3.3 cm)
Weight .38 lb (.17 kg) including battery
Dust/water resistance IP 40
Pollution degree 2
Overvoltage category CAT IV 600 V
Agency approvals CE
cCSAus
Safety Conforms to EN 61010-1
EN 61010-031
EN 61557-1
EN 61557-7
EMC Conforms to EN 61326-1

Electrical Specifications
Rotary field detection
Voltage range (frequency) 40 – 700 V (16 – 60 Hz)
50 – 700 V (60 – 400 Hz)
Nominal test current < 3.5 mA
Non-contract rotary field indication
Frequency range 16 - 400 Hz
Motor connection (with leads)
Voltage range ≥ 1 – 700 V
Frequency range 2 - 400 Hz
Nominal test current < 3.5 mA



For complete specs please download the product datasheet under the "Resources" tab.
Model NameDescriptionBuy it
AMP PRM-6Includes:
  • 3 test probes
  • 3 alligator clips
  • User manual
  • Carrying bag
  • 2 AAA batteries
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe