Home  |  Products  |  Electrical Testers  |  Non-Contact Voltage Detection  |  
This product is discontinuedAmprobe suggests:
VP-1000SB Non-Contact Voltage Probe with Shaker

Amprobe VP-600SB Non-Contact Volt Detector

Click here to watch video

Amprobe VP-600SB Non-Contact Volt Detector
Amprobe VP-600SB Non-Contact Volt Detector
Amprobe VP-600SB Non-Contact Volt Detector
Amprobe VP-600SB Non-Contact Volt Detector
Amprobe VP-600SB Non-Contact Volt Detector

Designed for safe, non-contact voltage detection, Amprobe's reliable volt tester, the VP-600SB Non-Contact Volt Probe doesn’t require much budget or demand much space. This volt tester fits conveniently in a shirt pocket, tool belt or pouch. The VP-600SB Non-Contact Volt Probe measures and tests volts from 100V to 600V.

Amprobe VP-600SB Non-Contact Volt Detector is rated 4.6 out of 5 by 45.
Rated 5 out of 5 by from Saved my bacon at least twice You know the whole "Trust but Verify"... At least twice now I've worked on stuff that coworkers have insisted were "dead", this in my toolbelt is a quick way to confirm. It's not dead, until you KNOW it's dead.
Date published: 2015-05-26
Rated 5 out of 5 by from Must have tool. Ace product, saves you time which means saving money. Small and neat, takes up as much room in your pocket as a couple of pens.
Date published: 2015-04-14
Rated 5 out of 5 by from I just love, love, love it-and so does everybody body else I have been collecting and trying out non-contact voltage testers for the past three years. I started trying this one and can't imagine not using it. I love the triple alert function. To bad they are not sold in Lowes anymore I wanted to give them away as gifts
Date published: 2015-01-11
Rated 4 out of 5 by from Good, but could be bettter I have purchased several of these units over the years and they have worked well with a couple of exceptions. Pocket clip needs to be stronger that is the first to go and break off. The second is the battery cap won't stay on. tried taping it on and finally drilling holes and putting 3/16" brass screws in to keep the cap on. Like it best for light ,sound and vibration with no on off switch
Date published: 2014-01-06
Rated 5 out of 5 by from Always works In the industrial environment this tester has held up for 3 years. I use it for voltages from 120V to 4160V (held at proper distance) I trust it completely
Date published: 2013-07-16
Rated 1 out of 5 by from Haven't found one that worked out the package yet I bought one of these at Loews, got it home and it did not work. I started to change the batteries when I noticed corrosion on the supplied batteries and the terminals. I returned to the store and asked for an exchange. Before leaving, I insisted that service desk clerk open the package and test it. SAME PROBLEM!!! On top of that, the plastic tab that holds the battery cap on snapped off. Needless to say, I demanded my money back. I expected a lot more from a company like Amprobe.
Date published: 2012-08-02
Rated 1 out of 5 by from Poorly Designed I thought this would be a great product for the home. Right out of the package after removing the battery shield it did not work. Then I checked the batteries and the terminals were corroded. I replaced the batteries at my cost and now the cover refuses to stay on. To sum it up, WORTHLESS!! Back to Lowes ASAP.
Date published: 2012-07-30
Rated 5 out of 5 by from EXCELLENT TOOL!!!! THIS IS A VERY HANDY TOOL. I WORK FOR A ELECTRIC UTILITY AND I DEAL WITH A LOT OF LOW VOLTAGE WIRING, THE VP-600SB IS ONE OF THE FIRST TOOLS OUT OF MY BAG. LIGHTWEIGHT, COMPACT, AND I LOVE THE POCKET CLIP. I WOULD RECOMMEND THIS TO ANYONE THAT IS INVOLVED WITH 120/240 VOLT WIRING, FROM HOMEOWNER TO CONTRACTOR.
Date published: 2012-05-15
  • y_2017, m_12, d_13, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_45
  • loc_en_US, sid_73444, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Detect AC Voltage (100 – 600V)
  • Use non-contact method of Voltage testing
  • Totally insulated, no exposed metal or conductive parts
  • Check for AC Voltages without necessity of disconnecting the electrical system
  • Test for AC Voltage cables, circuit breakers, wall sockets, junction boxes, fuses, etc.
FEATURE VP-600SB
AC Voltage detection 100 V → 600 V
Indicator Lights, Beeps and Vibrates
Safety rating CAT III 600 V


For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
VP-600SB
  • Detect AC Voltage (100 – 600V)
  • Use non-contact method of Voltage testing
  • Totally insulated, no exposed metal or conductive parts
  • Find and pinpoint breaks in wires
  • Voltage Buzzer and Voltage Shaker
Included Accessories:   Users manual, batteries (installed)
           
Related Products

11 reviews
 
 Amprobe VP-440 Non-Contact Volt Detector »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe