Home  |  Products  |  Electrical Testers  |  Circuit-Test-and-Analysis - Receptacles, Breakers and LAN  |  

Amprobe LAN-1 LAN Cable Tester


Amprobe LAN-1 LAN Cable Tester
Amprobe LAN-1 LAN Cable Tester
Amprobe LAN-1 LAN Cable Tester

The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go/no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results.

Amprobe LAN-1 LAN Cable Tester is rated 4.5 out of 5 by 2.
Rated 4 out of 5 by from cable tester - interesting! very interesting and useful product for electricians....
Date published: 2012-03-27
Rated 5 out of 5 by from I liked the ease of use. The tester was easy to use and worked very well in the field it made the job at hand a lot more easy I recamend this tool for the field or even at home.
Date published: 2012-03-26
  • y_2017, m_12, d_12, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_73263, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Test pin configuration for:
  • 10/100 base -T cable
  • 10 base-2 cable
  • RJ45 modular cables
  • AT&T 258A cable
  • EIA/TIA 568A/568B cables
  • Token ring cable
  • Verify the cable wiring for continuity, opens, shorts or incorrect wiring
  • Test installed cable on wall plate or the patch panels by using the remote termination module
  • Perform loopback test or remote test
  • Buzzer sound warning for error condition in cable
  • Two sets of LED lights for source and test indication
  • Maximum line length: > 300 meters
  • Connector types: RJ45, BNC
FEATURE LAN-1
Cable types tested 10/100 base-T; 10 base-2; RJ45; AT&T 258A; EIA / TIA 568A/568B; Token Ring
Continuity maximum length > 300 meters
Connector types RJ45, BNC

Specifications
Display: 18 LEDs: 9 red and 9 green, 9 LEDs on remote module
Battery: Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22
Low battery indicator: The LED indicator will not turn on when BATT button is pushed
Operating environment: 0 to 40°C (32 to 104°F), 10 to 70% RH



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
LAN-1
  • Verify the cable wiring for continuity, opens, shorts or incorrect wiring
  • Test installed cable on wall plate or the patch panels by using the Remote Termination module
  • Many Test pin configurations
Included Accessories:   Users manual, batteries(installed), remote terminator, RJ45 to female BNC cable, RJ45 to male BNC cable,RJ45 to RJ45 cable, Female BNC to Female BNC cable
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe