|
|
Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™
5
5
3
3
ACD-20SW Superior Amprobe Quality
Well engineered. Full of features. Suits my needs. Amprobe quality as always.
March 29, 2012
Simple to Use
Simple to use and fast. The swivel makes it easy to use.
March 29, 2012
No more handstands at the panel!
The swivel clamp meter is an idea long overdue. I have stood on my head for the last time trying to take a reading without tickling the hot leads in a tight panel or crammed pull box.
The LCD read out is large and clear for the shadowy places we wind up and the clamp is agile enough to weave through a tangle of conductors of almost any size. Its also good for left or right sides when all the contractor gave you was the minimum 30" wide clearance.
If I was adding anything, it would be a backlit LED or LCD readout and up it to 1000V capacity. Sometimes 600s aren't 600!
January 4, 2012
|
- 180 degree rotating head for the perfect display viewing
- Advanced VoltTect™ non-contact voltage detection
- Slim jaw design with one hand operation
- Measures AC current up to 400 AC A, AC/DC voltage up to 600V, resistance and capacitance
- Audible continuity
- Temperature measurement
- Audible continuity
- Auto power off
- Auto and manual ranging respectively for quick checks and precise measurements
- Data hold
- Diode test
- Accommodates conductors up to 1.18 (30mm) in diameter
- Test leads, battery (installed), users manual, carrying case are included with the product
|
| TRMS |
- |
- |
- |
• |
• |
- |
| AC Current |
40.00 A , 400.0 A |
+/- (2.0 % rdg + 10 dgts)
50 Hz → 60 Hz |
| AC Voltage |
4.000 V, 40.00 V, 400.0 V, 600.0 V |
+/- (1.2% rdg + 8 dgts)
→ 400 V Hz |
| DC Voltage |
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600.0 V |
+/- (0.5% rdg + 2 dgts) |
| Resistance |
400.0 ?, 4.000 k?, 40.00 k?, 400.0 k?, 4.000 M?, 40.00 M? |
+/- (1.0% rdg + 4 dgts) at 400 ? → 400 k? ranges |
| Capacitance |
- |
4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF |
- |
4.000 µF, 40.00 µF,
400.0 µF, 4,000 µF |
+/- (3.0 % rdg + 15 dgts)
on 40 µF → 400 µF ranges |
| Temperature |
- |
-30 °F → 400 °F |
-35 °C → 400 °C |
- |
-30 °F →400 °F, (-35 °C → 400 °C) |
+/- (1 % + 2 °F) -4 °F → 400 °F
+/- (1 % + 1 °C) 0 °C → 200 °C |
| Diode test |
• |
- |
- |
- |
- |
- |
| VolTect™ non-contact voltage detection |
70 V → 600 VAC (50 Hz → 60 Hz) |
- |
| Backlight |
- |
- |
- |
• |
• |
- |
| Accommodates conductors |
Up to 1.18" (30 mm) in diameter |
| Specifications |
| Display: |
3¾ digit liquid crystal display (LCD) with a maximumreading of 3999 |
| Polarity: |
Automatic, positive implied, negative polarityindication |
| Overrange: |
(OL) or (-OL) is displayed |
| Zero: |
Automatic |
| Measurement rate: |
2 times per second, nominal |
| Accuracy: |
Stated accuracy at 74°F ±8°F, <75% relativehumidity. |
| Jaw opening capability: |
30mm (1.18 in) conductor. |
| Power: |
1.5 volt battery x2, R03/SIZE AAA. |
| DC volts ranges: |
400mV, 4V, 40V, 400V, 600V |
| Accuracy: |
±(0.5% rdg + 2 dgts) |
| AC Volts (50hz - 500hz) ranges: |
4V, 40V, 400V, 600V |
| Accuracy: |
±(1.2% rdg + 5 dgts) ±(1.5% rdg + 5 dgts) on 600V range |
| AC Current (50hz - 60hz) ranges: |
40A , 400A |
| Accuracy: |
±(2.0% rdg + 6 dgts) 50 ~ 60Hz |
| Resistance ranges: |
400O, 4kO, 40kO, 400kO, 4MO, 40MO |
| Accuracy: |
±(1.0% rdg + 4 dgts) on 400O to 400kO ranges |
| Accuracy: |
±(1.5% rdg + 4 dgts) on 4MOrange |
| Accuracy: |
±(3.0% rdg + 5 dgts) on 40MO range |
| Continuity range: |
400O |
| Diode test current: |
1.2mA (approximate) |
| Accuracy: |
±(3.0% rdg + 3 dgts) |
| Non-contact voltage indicator: |
Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges. |
For complete specs please download the product datasheet under the “Resources" tab.
|
| Model Name | Description | Price List | | ACD-20SW | - 180 degree rotating head for the perfect display viewing
- Advanced VoltTect non-contact voltage detection
- Slim jaw design with one hand operation
Included Accessories: Test leads, battery (installed), users manual, carrying case |
| Test Leads | | DL248D | Amprobe DL248D |
| Other | | ELS2A | ELS2A AC Current Clamp Accessory |
|
|
|
|
|
|
|
|