amprobe
U.S. [Visit Amprobe Europe]
Home  |  Products  |  Clamp Meters  |  Multimeter Clamps  |  
Contact usRefer this page

Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter


Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter

Amprobe ACD-10 TRMS-PLUS clamp meter takes AC/DC measurement with true-rms accuracy and offers capacitance and frequency.  It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 25 mm.

Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter 4.9 5 10 10
this product is compact and has it all this product is just a great all around meter! that is easy to carry when working in the field September 4, 2014
solid meter We use this meter in an HVAC program. It is easy to use, reliable and tough. April 1, 2012
Very easy to use, a lot of options. I have used this in an industrial setting for a while and have always had accurate results. March 31, 2012
Easy to use I am a facility manager and I use this amprobe meter quite often. It is very easy to use. Comes in handy when checking and troubleshooting motors and pumps. I would not exchange this tool for anything else. March 30, 2012
great tool I have had many multimeters and this is by far the best. Its features are easy to use and it doesn't have a lot of unneeded optins for my application. I was the first in our shop to purchase an amprobe brand meter and now evrybody in the shop has one. March 30, 2012
Quality tools are the key to success. On a one to ten scale I would rate this Multimeter and Amp meter combination to any one in the HVAC/R field of work. It has all the functions needed to troubleshoot an HVAC/R system. Easy to use and is rugged. March 29, 2012
one tool many uses I have enjoyed using the acd10 amp/multi meter because it reduces the amount of meters to carry when trouble shooting an air conditioning system and have found it to be very useful. March 29, 2012
Excellent tool!!! Tool overall is easy to read,use and utilize especially in tough working conditions. It provides a good grip feel in your hands, and a sense of trust in this quality equipment when safety is most important.TRMS is an excellent, high quality feature March 29, 2012
2 next>>
  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin jaws, only 10mm (0.4) thick
  • Resistance to 40MΩ
  • Continuity buzzer
  • Capacitance to 3000 uF
  • Frequency measurement
  • In rush current
  • Hold & maximum reading functions
  • Accommodates conductors up to 26mm (1.02) in diameter
  • Auto ranging
  • Auto power off
  • Rubber over-molded case
  • Overload protected
  • True-rms measurement
  • Included accessories: test leads, battery installed, soft carrying pouch, and users manual
FEATURE ACD-10 PLUS ACD-10 TRMS-PLUS
True-rms – •
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 Ω, 4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 μF, 50.00 μF, 500.0 μF, 3000 μF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Temperature - -
Dual displays - -
Micro Amps - -
Accommodates conductors up to 1.0” (25 mm) in diameter

Specifications
Display: 3-3/4 digits 4000 counts LCD display
Update rate: 3 per second nominal
Polarity: Automatic
Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude: Operating below 2000m; Indoor use
Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery: Below approx. 2.4V
Power supply: 3V coin battery IEC-CR2032
Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
APO timing: Idle for 30 minutes
APO consumption: 5 µA typical
Jaw opening & conductor diameter: max 26 mm
Special features: 30ms Max Hold; Data Hold; Relative Zero mode



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
ACD-10 TRMS-PLUS
  • TRMS Measurement
  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin Jaws, only 10mm (0.4”) thick
  • Resistance to 40MΩ
Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual
 

Test LeadsBuy it
DL248DAmprobe DL248D 

OtherBuy it
ELS2AELS2A AC Current Clamp Accessory 
Search
Find Resources
Find Products
Related Products

5 reviews
 
 Amprobe ACD-10 PLUS 600A Clamp Multimeter »

13 reviews
 
 Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature »

Follow us   Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us © 1995 - 2014 Amprobe