Home  |  Products  |  Accessories  |  Current Transducers  |  

Amprobe CT-53 Flex Current Sensor for DM-5

safety certifications safety certifications safety certifications


 AMP CT-53

Amprobe Flex Current Sensor Developed for the Amprobe DM-5, your all-in-one solution for excellent power quality.

Included in the DM-5 kit.

Features CT-53 Flex Current Sensor
Current ranges 300 A / 1000 A / 3000 A, AC rms
Output voltage 300 A range: 500 mVac / 300 Aac (1.67 mV / A)
1000 A range: 500 mVac / 1000 Aac (0.5 mV / A)
3000 A range: 500 mVac / 3000 Aac (0.167 mV / A)
Measuring range 300 A range: 30 A to 300 A (424 Apeak)
1000 A range: 100 A to 1000 A (1414 Apeak)
3000 A range: 300 A to 3000 A (4243 Apeak)
Accuracy (sine wave) ±1.0% (45 Hz to 65 Hz)
Phase characteristics Within ±1°
300 A range: 30 A to 300 A (45 Hz to 65 Hz)
1000 A range: 100 A to 1000 A (45 Hz to 65 Hz)
3000 A range: 300 A to 3000 A (45 Hz to 65 Hz)
Working voltage 600 Vac rms
Max allowed input 3600 Aac continuous (45 Hz to 65 Hz)
Measurable conductor size Max. 5.9 in (15 cm) diameter
Head circumference 21.65 in (55 cm)
Head cable diameter 0.56 in (14.3 mm)
Cable length (head to electronics) Approx. 6.56 ft (2 m)
Cable length (output cable) Approx. 3.28 ft (1 m)
Output terminal Mini-DIN-6 connector
Output impedance 100 Ω or less
Current consumption
(at power supply 3 V)
15 mA (typical)
Operating temperature and humidity 32 °F to 122 °F (0 °C to 50 °C), ≤85 %RH (no condensation)
Guaranteed accuracy at 73 °F ± 9 °F (23 °C ± 5 °C), ≤85 %RH (no condensation)
Storage temperature and humidity -4 to 140 °F (-20 °C to 60 °C), ≤85 % RH (no condensation)
Operating altitude 0 to 6,561 ft (0 to 2,000 m)
EMC EN 61326
Safety compliance UL/IEC 61010-1, IEC 61010-2-030, IEC 61010-2-032 Measurement CAT III 600 V, Pollution degree 2
Certification (UL tested with DM-5) safety certifications safety certifications
Weight Approx. 2.1 lb (950 g)
Model NameDescriptionBuy it
AMP CT-53Amprobe CT-53 Flex Current Sensor for DM-5 
           
Related Products

 Write the first review
 
 Amprobe Carrying Case with Magnet for DM-5 »

 Write the first review
 
 Amprobe CT-500 Flex Current Sensor for DM-5 »

 Write the first review
 
 Amprobe PC-5 AC Line Power Adaptor for DM-5 »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe