amprobe
Australia [Change Country]
Home  |  Products  |  Electrical Testers  |  Circuit-Test-and-Analysis - Receptacles, Breakers and LAN  |  
Contact usRefer this page

INSP-3 Wiring Inspector Circuit Tester

Click here to watch video

INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester
INSP-3 Wiring Inspector Circuit Tester

The INSP-3, wiring inspector is a rugged circuit tester designed to test building wiring compliance to electrical code, especially voltage drop under load. With this circuit tester you can easily identify issues with splices, connections and conductor quality, crucial to safety and performance of the electrical system


 
  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
  • Meter detects faulty wiring in need of repair without removing outlets cover plates, or panel covers:
  • oFaulty splices and connections
  • oIncorrect wiring
  • oUndersized wiring
  • oFaulty GFCIs,
  • oFaulty or incorrectly wired AFCIs
  • oIncorrect line voltage
  • oPoor ground quality
  • User selectable 0, 10,15 and 20 amps loads to verify performance of the electrical system
  • Incorrect wiring or voltage drop test failure is clearly indicated by flashing screen
  • Will not trip circuit breakers or blow fuses during the test
  • Tests GFCI and AFCI operations
  • Check ground quality for safety and ability to support sensitive electronic equipment
  • Measure fault currents
  • Save money and time by eliminating guess work
  • NOTE: The Inspector™ III does not check the condition of wiring insulation.
Load:    Constant 0, 10, 15 or 20 AMP simulation regardless of line voltage
Operating Voltage:    95-140 VAC +/-2%, +/- 2 digits
GFI Trip:    6.0 mA nominal to trip GFI, 30 mA to trip RCD
AFCI Trip:    Up to 8, 120 AMP pulses within 1/2 second period
Model NameDescription
INSP-3
  • Testing efficiency - relevant test data (voltage, voltage drop, hot and neutral voltage drop, voltage with load, ground impedance) is presented on a single large display to save operator time - no scrolling or switching screens needed
  • Verifies if wiring is tested for load carrying ability that it meets electrical code recommendations for voltage drop under load
Included Accessories:   Power cord,9 V alkaline battery (installed),users manual, carrying case
Search
Find Resources
Find Products

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe