amprobe
Australia [Change Country]
Home  |  Products  |  Digital Multimeters  |  AM-500 Digital Multimeter Series  |  
Contact usRefer this page

Amprobe AM-530 True-rms Electrical Contractor Multimeter

Click here to watch video

AM-530
AM-530
AM-530
The Amprobe AM-530 autoranging digital multimeter is the multimeter of choice for professional electrical contractors. The AM-530 is a True-rms digital multimeter so it accurately measures voltage on systems affected by harmonics. With its full menu of digital multimeter features, you can use it to: measure and verify the presence of voltage before connecting new equipment or performing repairs; run new wiring; check continuity of electrical connections; identify blown fuses; troubleshoot motors or check transformers. The CAT III 600V safety rating provides an extra measure of safety for high voltage multimeter applications. Its built-in flashlight helps you see wire colors in the dark and “third hand probe holder gives you an extra hand when you need it.


AM-500 AM-510 AM-520 AM-530 AM-560 AM-570

Multimeter Type Auto-ranging Com / Res HVAC Electrical Adv. HVAC Industrial
F
U
N
C
T
I
O
N
Safety Rating Safety CAT III 600V CAT III 600V CAT III 600V CAT III 600V CAT IV 600V
CAT III 1000
CAT IV 600V
CAT III 1000
Measure voltage in noisy environments True rms



Electrical panels, AC outlets AC Voltage (V) 600 600 600 600 1000 1000
DC systems, auto/marine batteries DC Voltage (V) 600 600 600 600 1000 1000
AC Current - electrical panels, appliances AC Current (A) 10 10 10 10 10 10
DC Current-electronics, DC motors DC Current (A) 10 10 10 10 10 10
Specified resistance and continuity Resistance (MOhms) 20 40 40 40 60 60
Flame sensors Microamps
Diodes in AC to DC converters Diode Test
Fuses, lightbulbs, wire connections Continuity
Household batteries Battery test



Motor startup or run capacitors Capacitance
Frequency verification Frequency
Non-contact voltage test Non-contact voltage
Electrical load-time on vs time off Duty cycle


Temp of air vents, fuses, transformers Temperature inputs

1 1 2 2
F
E
A
T
U
R
E
S
Automatically selects measurement range Autoranging
Manually select measurement range Manual ranging
Voltage on variable frequency drives Low pass filter



Detect stray voltages Low Z




Dimly lit areas Built-in flashlight
D
I
S
P
L
A
Y
Meter resolution LCD Counts 2,000 4,000 4,000 4,000 6,000 6,000
Dimly lit areas Backlight
Monitoring fast changing signals Bar graph

Two relative measurements on one screen Dual display



E
V
E
N
T
S
Data memory Data hold
Difference between two measurements Relative reading
Max/min peak measurement Max/min hold

Specialized signal measurements Peak hold (crest)



  • Voltage up to 600V ac and 600V dc, ac/dc current, resistance, frequency, capacitance, and temperature
  • True-rms
  • VolTect™ Non-contact voltage detection
  • Audible continuity
  • Diode test
  • Data hold
  • Max/min memory
  • Relative zero mode
  • Built-in flashlight and back lit LCD display with analog bar graph
  • Built-in test leads storage and "third hand test lead holder
  • Auto and manual ranging
  • Auto power off
  • Low battery warning
  • Safety rated: CAT III 600V
FEATURE AM-530 Best Accuracy
True-rms X
AC Voltage 400 mV, 4.000 V, 40.00 V,
400.0 V, 600 V
+/- (1.0 % rdg + 3 LSD)
@ 45 Hz to 400 Hz, 4 V to 400 V ranges
DC Voltage 400 mV, 4.000 V, 40.00 V,
400.0 V, 600 V
+/- (0.8% rdg + 1 LSD)
@ 4 V to 400 V ranges
AC Current 400.0 μA, 4000 μA,
40.00 mA, 400.0 mA,
4.000 A, 10.00 A
+/- (1.2% rdg + 3 LSD)
@ 400 μA to 400 mA ranges, 45 Hz to 400 Hz
DC Current 400.0 μA, 4000 μA,
40.00 mA, 400.0 mA,
4.000 A, 10.00 A
+/- (1.0% rdg + 2 LSD)
@ 400 μA to 400 mA ranges
Frequency 10 Hz to 10 MHz +/- (0.1% rdg + 4 LSD)
Resistance 400.0 Ω,
4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000 MΩ, 40.00 MΩ
+/- (1.0% rdg + 2 LSD)
@ 4 kΩ to 400 kΩ ranges
Capacitance 40.00 nF, 400.0 nF,
4.000 μF, 40.00 μF, 400.0 μF,
4000 μF
+/- (3.0% rdg + 5 LSD)
@ 400 nF to 40 μF ranges
Temperature -40 ⁰F to 1832 ⁰F
-40 ⁰C to 1000 ⁰C
+/- (1.8% rdg + 6 ⁰F) @ >32 ⁰F to 212 ⁰F
+/- (1.2% rdg + 3 ⁰C) @ >0 ⁰C to 100 ⁰C
Number of temperature inputs Single Thermocouple


For more detailed specifications, please download the product datasheet under the “Resources" tab.
Model NameDescription
AM-530Included Accessories:
  • 9V(6F22) x1 battery installed
  • Test leads
  • Type-K Probe x 1
  • Velcro strap Carrying case
  • Users manual
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe AM-520 HVAC Multimeter »

 Write the first review
 
 Amprobe AM-560 Advanced HVAC Multimeter »

 Write the first review
 
 Amprobe AM-570 Industrial Multimeter »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe