amprobe
Australia [Change Country]
Home  |  Products  |  Digital Multimeters  |  AM-500 Digital Multimeter Series  |  
Contact usRefer this page

Amprobe AM-510 Commercial/Residential Multimeter

Click here to watch video

AM-510
AM-510
AM-510
AM-510
AM-510
Compact yet tough, the Amprobe AM-510 autoranging digital multimeter delivers rugged, accurate performance for light commercial and advanced residential applications like rewiring an electrical panel, installing heated floors and light fixtures, troubleshooting and repairing home appliances, electrical sockets, and automotive electrical problems. Its CAT III safety rating and ease of use make it ideal for high voltage multimeter applications. Innovative digital multimeter features expedite go/no-go checks, and the built-in flashlight makes it easy to see wires and fuses in the dark. Plus a rubber tilt stand and a probe holder give you a “third-hand when you need it.


AM-500 AM-510 AM-520 AM-530 AM-560 AM-570

Multimeter Type Auto-ranging Com / Res HVAC Electrical Adv. HVAC Industrial
F
U
N
C
T
I
O
N
Safety Rating Safety CAT III 600V CAT III 600V CAT III 600V CAT III 600V CAT IV 600V
CAT III 1000
CAT IV 600V
CAT III 1000
Measure voltage in noisy environments True rms



Electrical panels, AC outlets AC Voltage (V) 600 600 600 600 1000 1000
DC systems, auto/marine batteries DC Voltage (V) 600 600 600 600 1000 1000
AC Current - electrical panels, appliances AC Current (A) 10 10 10 10 10 10
DC Current-electronics, DC motors DC Current (A) 10 10 10 10 10 10
Specified resistance and continuity Resistance (MOhms) 20 40 40 40 60 60
Flame sensors Microamps
Diodes in AC to DC converters Diode Test
Fuses, lightbulbs, wire connections Continuity
Household batteries Battery test



Motor startup or run capacitors Capacitance
Frequency verification Frequency
Non-contact voltage test Non-contact voltage
Electrical load-time on vs time off Duty cycle


Temp of air vents, fuses, transformers Temperature inputs

1 1 2 2
F
E
A
T
U
R
E
S
Automatically selects measurement range Autoranging
Manually select measurement range Manual ranging
Voltage on variable frequency drives Low pass filter



Detect stray voltages Low Z




Dimly lit areas Built-in flashlight
D
I
S
P
L
A
Y
Meter resolution LCD Counts 2,000 4,000 4,000 4,000 6,000 6,000
Dimly lit areas Backlight
Monitoring fast changing signals Bar graph

Two relative measurements on one screen Dual display



E
V
E
N
T
S
Data memory Data hold
Difference between two measurements Relative reading
Max/min peak measurement Max/min hold

Specialized signal measurements Peak hold (crest)



  • Measurements: Voltage up to 600VAC and 600VDC, ac/dc Current, Resistance, Frequency, Capacitance, Temperature
  • VolTect™ Non-contact voltage detection
  • Audible continuity
  • Diode test
  • Data hold
  • Max/min memory
  • Relative zero mode
  • Built-in flashlight
  • Built-in test leads storage and "third hand" holder
  • Auto and manual-ranging
  • Auto power off and low battery warning
  • Backlit LCD display with analog bar graph
  • Velcro strap to hang a meter
  • Safety rated: CAT III 600V
FEATURE AM-510 Best Accuracy
AC Voltage 400 mV, 4.000 V, 40.00 V,
400.0 V, 600 V
+/- (1.0 % rdg + 3 LSD)
@ 45 Hz to 400 Hz, 4 V to 400V ranges
DC Voltage 400 mV, 4.000 V, 40.00 V,
400.0 V, 600 V
+/- (0.8% rdg + 1 LSD)
@ 4 V to 400 V ranges
Resistance 400.0 Ω,
4.000 kΩ, 40.00 kΩ, 400.0 kΩ,
4.000 MΩ, 40.00 MΩ
+/- (1.0% rdg + 2 LSD)
@ 4 kΩ to 400 kΩ ranges
AC Current 400.0 μA, 4000 μA,
40.00 mA, 400.0 mA,
4.000 A, 10.00 A
+/- (1.2% rdg + 3 LSD)
@ 400 μA to 400 mA ranges
DC Current 400.0 μA, 4000 μA,
40.00 mA, 400.0 mA,
4.000 A, 10.00 A
+/- (1.2% rdg + 3 LSD)
Frequency 10 Hz to 10 MHz +/- (0.1% rdg + 4 LSD)
Capacitance 40.00 nF, 400.0 nF,
4.000 μF, 40.00 μF, 100.0 μF,
4000 μF
+/- (3.0% rdg + 5 LSD)
@ 400 nF to 40 μF ranges
Temperature -40 °F to 1832 °F

-40 °C to 1000 °C
+/- (1.8% rdg + 6 °F) @
>32 °F to 212 °F
+/- (1.2% rdg + 3 °C) @
>0 °C to 100 °C
Number of temperature inputs Single Thermocouple  


For more detailed specifications, please download the product datasheet under the "Resources" tab.
Model NameDescription
AM-510Included Accessories
  • 9V(6F22) x1 battery installed
  • Test leads
  • Users manual
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe AM-560 Advanced HVAC Multimeter »

 Write the first review
 
 Amprobe AM-570 Industrial Multimeter »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe