Amprobe AT-6020 Advanced Wire Tracer Kit

(2 customer reviews)

  • Traces wires in walls, ceilings, floors and corners
  • Locates breakers and fuses
  • Pinpoints shorts and opens
  • High resolution 2.5″ TFT LCD color display
  • Three Transmitter signal modes
    • “High Signal” mode for normal circuits
    • “Low Signal” mode for precision tracing in difficult areas
    • “Loop” mode for closed loop de-energized circuits
  • Four Receiver tracing modes
    • “Quick Scan” mode allows for quick wire detection at a longer distance
    • “Precision” mode precisely pinpoints wires or faults located behind walls, floors, or ceilings
    • “Breaker Identification” mode facilitates quick and easy breaker locating
    • “Non-Contact Voltage Detection” mode utilizes passive tracing without the Transmitter to verify if a wire is energized
  • Two automatically selected frequency modes for reliable tracing on energized and de-energized circuits
  • Comes with custom Amprobe hard carrying case, test leads, and accessories
  • Compatible with optional Signal Clamp (CT-400) clamp-on attachment and TIC 410A Hot Stick attachment to extend your reach

SKU: 4867981 Category:

Description

Amprobe’s newest wire tracer combines a Receiver and powerful Transmitter to locate energized and de-energized wires, breakers, and fuses without having to disconnect any equipment. The Receiver features four tracing modes optimized for a range of applications. Its fully automatic breaker tracing capability saves time and eliminates the confusion of multiple false positives by detecting the highest recorded signal in a breaker or fuse. The Transmitter utilizes two optimized frequencies that allows for a clean and reliable signal. The Signal Clamp can be used in applications where there is no access to bare conductors by enabling the Transmitter to induce a signal into a wire through insulation. Whether you’re a novice user or an expert, the AT-6000 Amprobe Advanced Wire Tracer kit will help you get the job done fast.

Additional information

Measurement Category

CAT III 600 V

Traces energized and de-energized wires

Locates energized and de-energized breakers and fuses

Receiver "Breaker Identification" mode

Finds shorts and opens

Transmitter "Loop" mode

Non-contact voltage detection

Two frequency modes

Transmitter Operating Voltage

0 to 600 V AC/DC

Receiver Display

Color 2.5" LCD

Rechargable Batteries

Signal clamp attachment

Optional

Demo-Request-URL

https://e.amprobe.com/AMP-NA-AMPROBE-2019-DemoContactRequest-USEN-LP-2-A?lcid=52a6279f-baab-e311-bf9f-a4badb1ddeb4&utm_campaign=GenericDemoRequest&utm_source=www.Amprobe.com&lls=200013&lpid=080e880a-7fc3-e011-b2b0-a4badb1ddec7&llr=1&plt=100000001&redir=https://amprobe.com/thanks-for-your-interest/&scl=953

Specifications

AT-6000-R Receiver AT-6000-T Transmitter CT-400 Signal Clamp
Measurement Category CAT III 600 V CAT III 600 V CAT IV 600 V, CAT III 1000 V
Operating voltage 0 to 600 V AC/DC 0 to 600 V AC/DC 0 to 1000 V AC
Operating frequency Energized: 6.25 kHz
De-Energized: 32.768 kHz
Energized: 6.25 kHz
De-Energized: 32.768 kHz
Wire tracing: 32.768 kHz
AC current measurement: 45 Hz to 400 Hz
Hazardous voltage detection See NCV detection > 30 V AC/DC N/A
Signal indications Numeric, bar graph display and audible beep LEDs and audible beep N/A
Response time Tip Sensor (energized/de-energized): 500 MS
NCV: 500 MS
Battery voltage monitoring: 5 sec
Line voltage monitoring: 1 sec
Battery voltage monitoring: 5 sec
Instantaneous
Current output of signal (typical) N/A Energized circuit:
HI mode: 60 mA RMS
LO mode: 30 mA RMS
De-energized circuit:
HI mode: 130 mA RMS
LO mode: 40 mA RMS
Loop mode: 160 mA RMS
1 mA/A for AC current measurement with multimeter
Signal voltage output (nominal) N/A De-energized circuit:
LOW: 29 V RMS, 120 Vp-p
HIGH: 33V RMS, 140 Vp-p
With CT-400:
loop model: 31 V RMS, 120 Vp-p
De-energized circuit:
2.4 V RMS, 24 Vp-p
Range detection (open air) Tip sensor (Energized):
Max distance via air: up to 20 ft (6.1 m)
Pinpointing: approx. 1.97 in (5 cm)
Tip sensor (De-energized):
Max distance via air: up to 14.7 ft (4.5 m)
Pinpointing: approx. 1.97 in (5 cm)
NCV detection (40 to 400 Hz):
Max. sensitivity: 90 V up to 6.56 ft (2 m)
Min. sensitivity: 600 V up to 0.39 in (1 cm)
N/A N/A

Videos

AT-6000 How to Find Breaks, Opens and Shorts

Identify the specific location of a fault.

 

AT-6000 How to Trace Wires in Metal Conduit

Move from junction box to junction box to follow the path of the wire.

 

AT-6000 How to Trace Wires

Trace Energized and De-energized wires.

 

AT-6000 How to Use the Signal Clamp

Induce a signal into a wire through insulation.

 

AT-6000 Breaker Identification

The Receiver clearly identifies the correct breaker every time.

 

AT-6000 Overview

Easy to use, the most advanced wire tracer in it’s class.

What’s Included

AT-6020 kit AT-6030 kit
AT-6000-R Receiver
AT-6000-T Transmitter
TL-6000 Test Lead and Accessory Kit
CC-6000 Hard Carrying Case
User Manual
1.5 V AA (IEC R6) Batteries (12) (not installed)
Rechargeable Batteries (12) (not installed)
Battery Chargers (3)
CT-400 Signal Clamp

Resources

Datasheet »
Product Manual »
Quick Start Guide »

2 reviews for Amprobe AT-6020 Advanced Wire Tracer Kit

  1. Bear

    Easy to use !

    Over the years, thousands of wires,hair balls and God knows what ,a good tool will save your butt. Most fire and security systems do not follow color codes, there can be five hundred to a thousand wires. Tracking down shorts breaks, this tool has my life easy.large fire panels multi zones and none of the wires are marked what can I say?

    ✔ Yes, I recommend this product.

  2. Jesse

    Amprobe circuit tracers are the best.

    I’m a commercial electrician and amprobe makes the best circuit tracers hands down. There’s no other competition. The only problem is tracking it down on the job site because no one wants to give it up.

    ✔ Yes, I recommend this product.

Add a review

Your email address will not be published. Required fields are marked *

The maximum upload file size: 700 MB. You can upload: image, audio, video, document, spreadsheet, interactive, text, archive, code, other. Links to YouTube, Facebook, Twitter and other services inserted in the comment text will be automatically embedded. Drop file here

You may also like…