amprobe
Australia [Change Country]
Home  |  Products  |  HVAC Tools  |  Ultrasonic Leak  |  
Contact usRefer this page

Amprobe TX900 Microwave Leakage Detector


Amprobe TX900 Microwave Leakage Detector
Amprobe TX900 Microwave Leakage Detector
Amprobe TX900 Microwave Leakage Detector
Amprobe TX900 Microwave Leakage Detector

The Amprobe TX900 Microwave Leakage Detector has been designed to assist domestic and commercial appliance engineers with microwave ovens. The Amprobe TX900 can be used to verify if the oven operates in accordance with current standards and regulations.


  • Measures for wave leakage and tests oven power
  • 8 dipole sensors – allows detection of plane wave signals of any polarization
  • Temperature compensation – accurate reading regardless of ambient temperature changes
  • Compact, ergonomic design
  • Low battery indication
  • Analog Bar Graph
  • Auto-zero
  • Accessories supplied: Two 500 ml Plastic Beakers, Spirit
Display    2-1/2 Digit LCD with 10 point bargraph display
Power Source:    9 Volt NEDA 1604A / IEC 6LR61 Battery
Low Battery:    approx. 6 V
Nominal Current:    10 mA
Sensor - Source Spacing:    circular - 5 cm
Environmental:    Indoor operation; below 6,562ft (2000m)
RF Power Sensing Range:    0 to 10 mW/cm2
Nominal Detecting Frequency:    2.45 GHz
Calibration Accuracy:    ± 1dB in plane wave - circular polarization
Response to Step Input:    < 1 sec.
Resolution:    0.1 mW/cm2
Model NameDescription
TX900
  • Measures for wave leakage and tests oven power
  • 8 dipole sensors – allows detection of plane wave signals of any polarization
  • Temperature compensation – accurate reading regardless of ambient temperature changes
Included Accessories:   2 x 500 ml plastic beakers, spirit (Alcohol), glass thermometer, battery(installed) carrying case, user manual
Search
Find Resources
Find Products

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe