amprobe
Australia [Change Country]
Home  |  Products  |  Environmental Testers  |  Sound  |  
Contact usRefer this page

Amprobe SM-10 Sound Meter

Click here to watch video

Amprobe SM-10 Sound Meter
Amprobe SM-10 Sound Meter
Amprobe SM-10 Sound Meter

The Amprobe SM-10 Sound Level Meter is designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and Quality Control in various environments. It offers two types of measurements: A and C weighting.

The A weighting is for general noise sound level and the C weighting is for measuring sound level of acoustic material control in various environments (ie. 94dB 1 kHz etc.). The SM-10 conforms to the IEC651 Type 2, ANSI S1.4 Type 2, and JISC1502 requirements for Sound Level Meters. Which means the SM-10 uses two different weighting filters required by the IEC 651 and ANSI S1.4 Type 2: the A-Weighting and the C-Weighting audio filtering.


  • Designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and quality control in various environments.
  • A and C weightings for checking compliance with safety regulations as well as acoustic analysis
  • Measuring ranges: A Weighting 30 ~130dB C Weighting 35~130dB
  • Frequency range: 31.5Hz~8KHz
  • Display with 0.1dB steps on a 4 digits LCD
  • Slow (1 sec) and fast (125ms) response settings to check peak and average noise levels
  • MAX/MIN recording
  • Data Hold to freeze reading on digital display
  • Accessories supplied: Carrying case, windscreen, user manual and 9V Battery
  • CE, designed to meet IEC651 Type2, ANSI S1.4 Type2
Display:    4 digits LCD
Microphone:    1/2 inch Electret condenser microphone
Power Supply:    9V NEDA 1604, IEC 6F22, JIS 006P battery
Auto Power Off:    Approx. 5 min
Environment:    Indoor operation, < 2000 m
Standard Applied:    IEC 651 Type2, ANSI 1.4 Type 2
Dynamic Range:    50 dB
Resolution:    0.1 dB, Display Update: 0.5 sec.
Time Weighting:    FAST(125mS), SLOW(1 sec)
Frequency Range:    31.5 Hz to 8 kHz
Model NameDescription
SM-10
  • Designed to meet the measurement requirements of Safety Engineers, Health, Industrial safety offices and quality control in various environments.
  • A and C weightings for checking compliance with safety regulations as well as acoustic analysis
Included Accessories:   Carrying case, users manual, battery(installed)
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe SM-20-A Sound Meter »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe