amprobe
Australia [Change Country]
Home  |  Products  |  Electrical Testers  |  Voltage and Continuity  |  
Contact usRefer this page

Amprobe VPC-31 Electrical Tester with VolTect™, LCD Display and Built-in Shaker

Click here to watch video

Amprobe VPC-31 Electrical Tester with VolTect, LCD Display and Built-in Shaker
Amprobe VPC-31 Electrical Tester with VolTect, LCD Display and Built-in Shaker
Amprobe VPC-31 Electrical Tester with VolTect, LCD Display and Built-in Shaker
Amprobe VPC-31 Electrical Tester with VolTect™, LCD Display and Built-in Shaker

Rugged and easy to use electrical tester, the Amprobe VPC-31, is great for live voltage and continuity checks. Built-in shaker provides the same functionality and feel asolder analog solenoid electrical testers with benefit of full input protection to CAT IV 600V / CAT III 1000V.


  • Super-bright bi-Color LED’s indicates safe and dangerous voltages (above 55VDC or 30VAC)
  • Auto hold feature - LED’s stay illuminated for 10 sec retaining a reading after the tests are disconnected
  • Solenoid tester-like shaker to indicate AC voltage presence
  • Automatically turns ON and OFF for easy and quick measurements
  • Non-contact voltage detection and GFCI test feature for testing GFCI receptacles and breakers
  • Standard detachable test lead (black) for easy replacement with optional longer or specialized probe
  • Automatically selects AC Voltage, DC Voltage or Continuity
  • LED’s indicate 10 levels of AC and DC Voltages::
  • Volts (AC) 24, 48, 120, 208, 240, 277, 347, 480, 600, 1000
  • Volts (DC) 6, 12, 24, 36, 48, 60, 72, 110, 220, 380
  • Auto backlit LCD Digital Display for precise voltage measurements
  • Continuity buzzer and Visual continuity indication (LED)
  • Water and dust proof, IP65 design
  • Detachable (Black) Test Lead, Screw-on Stationary (Red) Probe, 2 Screw-on 4mm Probe batteries installed and User’s manual
LCD Display:    3 digits 1000 counts In an RF Field of 3V/m, total accuracy = Specified accuracy + 45d. Performance above 3V/m is not specified
Update Rate:    5 per second nominal
Operating Temperature:    -10ºC ~ 55ºC (14ºF ~ 131ºF)
Relative Humidity:    Maximum relative humidity 80% for temperature up to 31ºC (87ºF) decreasing linearly to 50% relative humidity at 55ºC (131ºF)
Altitude:    Operating below 2000m
Storage Temperature:    -20ºC ~60ºC (-4ºF ~ 140ºF), < 80% R.H. (with battery removed)
Temperature C oefficient:    Nominal 0.15 x (specified accuracy)/ ºC @ (-10ºC ~ 18ºC or 28ºC ~ 55ºC), or otherwise specified
Average Sensing:    IP65
Pollution Degree:    2
Safety Rated:    CAT III 1000V & CAT IV 600V AC & DC
Measurement Category:    8kV lightning surge (1.2/50µs)
Overload Protection:    1000VDC & VAC rms
Low Battery:    Below approx. 2.4V
Power Supply:    Standard 1.5V AAA Size (NEDA 24G or IEC R03) battery X 2; or 1.5V AAA Size (NEDA 24A or IEC LR03) alkaline battery X 2
Power Consumption (typical):    3mA at Power-on ready; 30mA at 1000VAC full LED indication. 75mA at 1000VAC with shaker ON
APO Consumption (typical):    10µA
Special Features:    High Input Impedance, Indicator Self-Test, Auto-Hold, Overload-Alert Warning, EF-Detection,
Special Features:    Auto Display Backlit, AC-Detection Shaker, Bi-Color LED Hazardous Live Warning, and GFCI Leakage Load
Model NameDescription
VPC-31
  • Super-bright bi-Color LED’s indicates safe and dangerous voltages (above 55VDC or 30VAC)
  • Auto hold feature - LED’s stay illuminated for 10 sec retaining a reading after the tests are disconnected
  • Solenoid tester-like shaker to indicate AC voltage presence
Included Accessories:   Users manual, batteries(installed), test leads
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe VPC-30 Electrical Tester with VolTect™ and Built-in Shaker »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe