amprobe
Australia [Change Country]
Home  |  Products  |  Clamp Meters  |  Swivel Clamps - Rotating head for easy display viewing  |  
Contact usRefer this page

Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™

Click here to watch video

Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™
Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™
Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™
Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™

Amprobe’s new Swivel™ Clamp on Meters feature a patented 180-degree rotating head clamp design allowing easy views of measurements in tight or inconvenient to reach places.

Simply rotate the body of the clamp meter to get an unobstructed view of the LCD display. Feature rich, measuring AC/DC currents, voltage, resistance and capacitance as well as CAT III 600V safety ratings make this clamp on meter something you should swivel to see.


  • Audible continuity
  • Auto and manual ranging respectively for quick checks and precise measurements
  • Auto power off
  • Data hold
  • Accommodates conductors up to 1.18” (30mm) in diameter
  • Test leads, battery (installed), Users Manual, Carrying Case and type-K thermocouple are included with the product
Display:    3¾ digit liquid crystal display (LCD) with a maximum reading of 3999.
Polarity:    Automatic, positive implied, negative polarity indication.
Overrange:    (OL) or (-OL) is displayed.
Zero:    Automatic.
Low Battery Indication:    The “ “ is displayed when the battery voltage drops below the operating level.
Auto Power Off:    Approx. 10 minutes.
Measurement Rate:    2 times per second, nominal.
Operating Environment:<./b>    0°C to 50°C / 32°F to 122°F at <70% relativehumidity.
Storage Temperature:    20°C to 60° / -4°F to 140°F, 0 to 80% R.H. with battery removed from meter.
Accuracy:    Stated accuracy at 74°F ±8°F, <75% relative humidity.
Temperature Coefficient:    0.1 × (specified accuracy) per °F, (32°F to 66°F, 82°F to 122°F).
Altitude:    6561.7 Feet (2000m).
Jaw Opening Capability:    30mm (1.18 in) conductor.
Power:    1.5 volt battery x2, R03/SIZE AAA.
DC Volts Ranges:    400mV, 4V, 40V, 400V, 600V
AC Volts (50Hz - 500Hz) Ranges:    4V, 40V, 400V, 600V
AC Current (50Hz - 60Hz) Ranges:    40A , 400A
Resistance Ranges:    400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ
Capacitance Ranges:    4uF , 40uF , 400uF , 4mF
Temperature Range:    -30°F ~ 400°F, -35°C ~ 400°
Continuity Range:    400Ω
Non-Contact Voltage Indicator:    Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges.
Model NameDescription
ACD-21SW
  • 180 degree rotating head for the perfect display viewing
  • Advanced VoltTect non-contact voltage detection
  • Slim jaw design with one hand operation
  • Temperature measurement
Included Accessories:   Test leads, battery (installed), users manual, carrying case, type-K thermocouple

Test Leads Probes and Clips
DL248DAmprobe DL248D

Other
ELS2AELS2A AC Current Clamp Accessory
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe ACD-20SW Swivel™ Clamp Meter with VoltTect™ »

 Write the first review
 
 Amprobe ACD-21SW 600V Swivel™ Clamp Meter with Temperature and VolTect™ »

 Write the first review
 
 Amprobe ACD-22SW True-rms Swivel™ Clamp Meter with VolTect™ »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe