amprobe
Australia [Change Country]
Home  |  Products  |  Clamp Meters  |  Multimeter Clamps  |  
Contact usRefer this page

Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature


Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature
Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature
Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature
Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature
Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature
The ACD-14 PLUS is the professionals’ choice for both HVAC and Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. The ACD-14 PLUS meter offers thinner jaws over standard clamp meters. Allowing access to tight measurement areas and still accommodating conductors up to 25 mm.
  • Dual Displays – Permits simultaneous reading of Amperage & Voltage
  • AC Current to 600A
  • New thin jaws, 5mm thinner than others to access tight measurement spaces
  • Micro Amps measurement for testing Flame Sensors
  • Capacitance to 3000 µF
  • Temperature with Type-K Thermocouple probe
  • AC and DC Voltage to 600V
  • Resistance to 40MΩ
  • Continuity Buzzer
  • Frequency measurement
  • Diode test
  • Hold and Maximum reading functions
  • In rush current
  • Accommodates conductors up to 25 mm (1.0) in diameter
  • Auto ranging
  • Auto power off and low battery indication
  • Rubber over-molded case
Display:    3-3/4 digits 4000 counts, dual LCD displays
Update Rate    3 per second nominal
Polarity:    Automatic
Low Battery Indication:    0°C to 40°C (32°F to 104°F)
Power Supply:    Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032
Model NameDescription
ACD-14 PLUS
  • Dual Displays – Permits simultaneous reading of Amperage & Voltage
  • AC Current to 600A
  • New thin jaws, 5mm thinner than others to access tight measurement spaces
  • Micro Amps measurement for testing Flame Sensors
Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual, type-K thermocouple with banana plug

Test Leads Probes and Clips
DL248DAmprobe DL248D

Other
ELS2AELS2A AC Current Clamp Accessory
Search
Find Resources
Find Products
Related Products

 Write the first review
 
 Amprobe ACD-10 PLUS 600A Clamp Multimeter »

 Write the first review
 
 Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter »

Follow us  Google+       Home  |  About Us  |   Privacy Statement  |  Site Map  |   Contact Us© 1995 - 2017 Amprobe