|
|
|
Amprobe invented wire tracer technology decades ago and continues to set the standard today. The most advanced of all wire tracers, the AT-4005 Advanced Wire Tracer combines the technology, features and functions to make wire tracing fast and precise.
|
Amprobe AT-4005CON Advanced Wire Tracer with Clamp on Attachment and Battery Booster
2.8
5
4
4
Transmitter was fried after first use.
During the first use of this tracer the transmitter stopped working and had a burning odor. Due to internal complication we were unable to return it for a replacement before warranty expired. Finally I purchased a new transmitter (11/2012) it did work on the first test, hope I can provide a better review later.
November 28, 2012
verry high price, low quality
I purchaced AT 4005 con .
After using couple hours i find out , that the tracer is not friendly use, it is very difficult to find exact circuit breaker.
After two hours the battery in transmiter was allmost deed and the recever was making different type of beep. (like dying).
Installed new Energizer batteries and started over, but still was not precise (i was testing same plug, same circuit , but every time showed me different spots). The receiver's head is too FLAT , WIDE, BIG, which makes very uncomfortable to touch and find the circuit breaker.
I did not like it and returned to the seller.
The price is too high for this type of quality.
I use to have other type of Amprobe testers , which were good. I expected At 4005 con to be very good one....
sorry did not work for me.
April 13, 2012
this is a great tool
This is a must have tool to have when doing electrical work.
March 29, 2012
got to have tool for the "smart" electrician
I would not even begin to trace w/o the assistance of such a tool.
Believe me its like finding "a needle"
Turns hours even sometimes days of exploritory work into minutes in most cases.
November 18, 2011
|
- One universal transmitter- automatically switches to work with either energized or non-energized systems
- Receiver not position sensitive- does not need to be rotated in order to provide accurate readings
- Traces live wires buried or hidden behind walls
- Traces energized and non-energized (open, broken) wires
- Performs tests without having to interrupt power
- Locates breakers, neutrals, and ground lines
- Locates and traces wires in walls, floors, conduit, computer cables, etc.
- Pinpoints shorts, ground faults and broken wires
- Does not interfere with sensitive electronic equipment
- Precise sensitivity adjustment
- Battery booster strengthens signal for open tracing
- Clamp-on attachment injects signal for non-contact operation
|
| Traces energized wires without power interruption. Locates breakers without power interruption. |
• |
• |
• |
• |
| Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts and ground faults. |
• |
• |
• |
• |
| Traces unenergized open wires (broken or disconnected wire). Pinpoints place where wire is broken. |
• |
• |
• |
• |
| Supplied with clamp-on attachment to inject signal without making contact with bare wire. |
- |
- |
• |
• |
| Supplied with Battery Booster to strengthen signal for open tracing. |
- |
- |
- |
• |
| Carrying case |
Soft SV-1000 |
Hard CC-AT-4000 |
Hard CC-AT-4000 |
Hard CC-AT-4000 |
| Receiver R-4000 CON |
• |
• |
• |
• |
| Transmitter T-4000 |
• |
• |
• |
• |
| 110V Pigtail - banana plug cord set C2901 |
• |
• |
• |
• |
| Alligator clip – banana plug cord set C2902 |
• |
• |
• |
• |
| Grounding test lead 25-ft. MTL-G |
• |
• |
• |
• |
| Alligator clip for ground lead VRC-320 |
• |
• |
• |
• |
| Clamp-on transmitter accessory A2202 |
- |
- |
• |
• |
| Rechargeable battery pack B2024 |
- |
- |
- |
• |
| Battery pack recharger B2025 |
- |
- |
- |
• |
| Users manual |
• |
• |
• |
• |
| Specifications |
| Transmitter operating voltage: |
9-600V AC/DC |
| Operating frequency: |
32.786kHz |
| Receiver short mode range: |
20' in air from the traced wire under test conditions |
| Receiver open mode range: |
12' in air from the traced wire under test conditions |
For complete specs please download the product datasheet under the “Resources" tab.
|
| Model Name | Description | Price List | | AT-4005CON | - Supplied with Hard Carrying Case, Clamp-on Transmitter, Battery Pack Recharger and Converter
- Locates and traces wires in walls, floors, conduit, computer cables, etc.
- Pinpoints shorts, ground faults and broken wires
- Traces energized and non-energized (open, broken) wires
- Precise sensitivity adjustment
Included Accessories: Soft SV-1000 Carrying case, R-4000 CON Receiver, Transmitter T-4000, 110V Pigtail - Banana Plug Cord Set C2901. Alligator Clips - Banana Plug Cord Set C2902, Grounding Test Lead 25ft. MTL-G, Alligator Clip for ground lead VRC-320, Clamp-on Transmitter Acc |
| Other | | A-5000 | Amprobe A-5000 A-Frame Ground Fault Locator | | M-5000 | Amprobe M-5000 Sonde Pipe transmitter for AT-5000 series |
|
|
|
|