Amprobe AT-2004-A Advanced Wire Tracer

Detects and traces wires buried in walls and floors, up to 13 feet (4 m) deep, as well as in plastic conduit, cable shield and computer cables
Traces energized wires and locates breakers without interrupting power
Traces de-energized wires (continuity and grounded wire) and pinpoints shorts and ground faults
Traces de-energized open (broken or disconnected) wires and locates the point where the wire is broken
Includes a clamp-on attachment for injecting a signal into wires when bare wire access isn’t available
Does not interfere with sensitive electronic equipment, such as in hospitals and data centers

SKU: 4416090 Category: Legacy Tools

Description

With the Amprobe AT-2004-A Wire Tracer you can trace live, de-energized, or open (broken) wires buried behind walls up to 13 feet (4 m) thick, without interrupting power.

It’s a great choice for finding wires in walls, locating breakers, neutrals, and ground lines, and zeroing in on shorts, ground faults, and broken wires. This electrical wire tracer doesn’t interfere with sensitive electronic equipment so it’s safe to use in data centers.

Specifications

FEATURE	AT-2004-A	AT-2005-A
Traces energized wires without power interruption. Locates breakers without power interruption.	•	•
Traces unenergized wires (wire continuity and wire grounded at the end). Pinpoints shorts ground faults.	•	•
Traces unenergized open wires (broken or disconnected wire). Pinpoints place where wire is broken.	•	•
Supplied with clamp-on attachment to inject signal without making a contact with bare wire.	•	•
Supplied with battery. Booster to strengthen signal for open tracing.	–	•

KIT CONTAINS:	AT-2004-A	AT-2005-A
R-2000 Receiver	•	•
S-2600-A Transmitter 9-300 V	•	•
T-2200 Transmitter for open tracing	•	•
A2201CE Clamp-on transmitter accessory	•	•
B2024 Rechargeable battery pack	–	•
B2025 Battery pack recharger	–	•
C2901 Cordset 110 volt plug to banana plugs	•	•
C2902 Cordset alligator clips to banana plugs	•	•
Users manual	•	•

Specifications
Traces energized wires without power interruption:	9-300V (S2600-A Transmitter)
Locates breakers without power interruption:	9-300V (S2600-A Transmitter)
Traces unenergized wires (wire continuity and wire grounded at the end):	S2600-A Transmitter and 9V batteries
Pinpoints shorts and ground faults:	S2600-A Transmitter and 9V batteries
Traces unenergized open wires (broken or disconnected wire):	T2200 Transmitter
Pinpoints place where wire is broken:	T2200 Transmitter
Supplied with clamp-on attachment to inject signal without making a contact with bare wire:	YES