Home  |  Products  |  Wire Tracers, Underground Cable and Cable Locators  |  Wire Tracers  |  

Amprobe AT-1000 Wire Tracer


Amprobe AT-1000 Wire Tracer
Amprobe AT-1000 Wire Tracer
Amprobe AT-1000 Wire Tracer
Amprobe AT-1000 Wire Tracer
The Amprobe AT-1000 Wire Tracer is just what you need for routine maintenance and troubleshooting.

This electrical wire tracer is easy to use, fast, and extremely accurate for tracing wires and detecting shorts, breakers, open conductors, and fuses from up to 3’ (.91 m) away. The AT-1000 wire locator tool traces both energized and de-energized lines and identifies control, alarm, and telephone system cables and coaxial shield cable.
Amprobe AT-1000 Wire Tracer is rated 4.3 out of 5 by 4.
Rated 5 out of 5 by from First time user Recently my old high school buddy asked me to help him on a massive project for a, let's just say, if I mention his name majority of you will know automatically who this big Hollywood hitter is. The job required huge amounts of wire and rewire for this gentle mans elaborate home entertainment system winding throughout almost the better part of his beautiful mansion. At first I was a little fearful when my boss & buddy handed me this product but my anxiety quickly melted away when to my surprise this tools ease in it's use, accuracy and speed became apparent. No complaints here.
Date published: 2012-03-30
Rated 5 out of 5 by from It justvworks!!! This product just simply works. I had a few problems with a mobile home and the Amprobe AT-1000 found all the problems in short order. I had wires that were burned complely through and was able to find them within an hour. 1 was in the front and two around the fuse box. Would have took me weeks and a possible fire if not for this tool. Best purchase I ever made, Thank you!!!
Date published: 2012-03-30
Rated 5 out of 5 by from This Tracer has done everything I need. I have used this product, using all the attachments and in every concievable manner possible and it has worked without fail. If I had a failure it was because the hookup and not the operation of the tool. I have also used some of the other Amprobe tracers and Test Equipment and all have performed great.
Date published: 2012-03-27
Rated 2 out of 5 by from Nice, when it worked. The AT-1000 worked well for me until problems developed. First, I would suggest avoiding any of Amprobe's testers that feature the supposedly convenient drop-in battery compartment "feature". It has a poor contact design that became intermittent in the receiver over time. Since it was out of warranty at that point, I disassembled it to discover one of very fine wires connecting the battery contacts was broken off, and the other broke while I was fixing the first one! Then it developed a second problem where the receiver sensitivity became intermittent. At this point I decided to send it in for service, but discovered the fee to repair and recalibrate the unit was going to cost MORE than a new set sells for. Until I get around to taking a stab at fixing it myself, it sits on the shelf gathering dust. Too bad; I like Amprobe products, but this situation is both economically and environmentally disappointing. It also makes me hesitant to purchase a new tracer from them if they can't fix their products.
Date published: 2012-02-03
  • y_2017, m_12, d_14, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_73149, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Traces energized lines up to 300 V ac/dc
  • Traces de-energized lines and open conductors
  • Locates shorts and identifies breakers and fuses without powering down
  • Identifies targeted control, alarm, and telephone system cables individually or in a bundle
  • Traces coaxial cable shield
  • Offers a receiver range up to 3' (1 m) from a cable being traced
  • Includes batteries (installed), transmitter, receiver, connection cables, soft carrying case, and user's manual
FEATURE AT-1000
Trace energized lines up to 300 V AC or V DC 100 V → 125 V ac (X1000 Transmitter)
Range 1-3’ from a cable being traced R1000 Receiver


For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
AT-1000
  • Trace energized lines up to 300VAC or VDC
  • Trace unenergized and open conductors
  • Identifies breakers and fuses without powering down
  • Locates shorts
Included Accessories:   Users manual, batteries (installed), transmitter receiver, connection cables, carrying case
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe