Home  |  Products  |  Power Quality, Insulation and Ground Resistance Testers   |  Ground Resistance  |  
This product is discontinued

Amprobe TELARIS EARTH-TEST Earth Resistance Tester


Amprobe TELARIS EARTH-TEST Earth Resistance Tester
Amprobe TELARIS EARTH-TEST Earth Resistance Tester
Amprobe TELARIS EARTH-TEST Earth Resistance Tester

The Telaris Earth-Test can test the ability of soil and grounding connection to conduct electricity and provide an electrical reference point. Good soil conductivity is needed to limit static electricity charge in potentially flammable situations and minimize the voltage difference between power return and earth ground for personal safety. Resistance testing is done by 2-wire, 3-wire or 4-wire testing methods.


Amprobe TELARIS EARTH-TEST Earth Resistance Tester is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Fast and reliable I do utility scale solar installations and i also service older solar systems and the number one problem is bad ground. Tracing down the ground problems can be a difficult task. This particular tool has made my ground fault detection and repair job so easy. I had one job the ground mount solar had 48VDC to 400VDC coming off the racking. It turned out to be around 50 of the solar panels had ground shorts inside the panels them self. I was able to quickly locate the particular the bad Yingli solar panels and replace them with good panels. 50 out of 2,000 panels is a very high failure rate and 400VDC from the equipment ground could kill some one. As part of my job I have to produce detailed reports for grounding and verify the large grounding fields are performing the correct impedance to earth for a safe system. I use to use a goofing hand crank meger tool that could produce high voltage to my wires to check for leaking or ground faults. But it was impossible to produce a quality report with these archaic tools. The high resolution digital measurement this tool provides is so much better and consistent. There is several products like this in the Amprobe line up that do a similar function but this one is pacifically designed for ground to earth validation and reports.
Date published: 2015-05-26
Rated 5 out of 5 by from This product is very handy in the field This product is very easy to use. Always has correct readings.Very useful in the field.
Date published: 2012-03-26
  • y_2017, m_9, d_24, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_73225, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Earth resistance measurement
  • The integrated constant current measurement principle allows the application in sandy as well in rocky environments
  • Monitoring and display of auxiliary earth and probe resistances
  • Displays of the actual test current
  • Automatic and manual and frequency selection for noise reduction
  • Test voltage preselection
  • Clear and large LCD providing the user with an optimum visual indication of both test values and limits
  • Auto power off
  • Earth resistance measurement 2/3 and 4-pole
  • Specific earth resistance measurement in compliance with the Wenner principle
FEATURE EARTH-TEST
Ground resistance 19.99 O, 199.9 O, 1999 O
Ground resistivity -
AC Currrent -
AC Voltage -

Specifications
Display: 3 digit; LCD; 1999 Count
Meas. rrinciple: Current-voltage measurement
Earth resistance: 0.05...19.99 O/ 0.01 O 20...199.9 O / 0.1O; 200...1999O / 1 O
Tolerance: ±(4% rdg.+2 Digits / 0.1O )
Probe/aux. resistance: 0.1...50 kO; / 0.1 kO
Tolerance: ±(10% rdg.+3Digits)
Test current display: 0.1...13 mA / 0.1 mA
Tolerance: ±(10% rdg.+3 Digits)
Max. test current: Approx. 12 mA
Test voltage: Max. 25 V / 50 V AC selectable
Frequency: 127 Hz / 140 Hz selectable
Safety complying with: IEC61010/EN61010/DIN VDE 0411 IEC61557/EN61557/DIN VDE 0413
Overvoltage category: CAT III / 300 V
Pollution degree: 2
Power supply: 6 x 1.5 V, IEC LR6



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
EARTH-TEST
  • Earth resistance measurement
  • The integrated constant current measurement principle allows the application in sandy as well in rocky environments
  • Monitoring and display of auxiliary earth and probe resistances
Included Accessories:   Users manual, batteries (installed), connection cables, carrying case

4 ground stakes can be ordered separately per part number:  GP-2CON
 
           
Related Products

1 review
 
 Amprobe GP-2A Ground Resistance & Resistivity Tester  »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe