Home  |  Products  |  Electrical Testers  |  Phase Sequence and Milliohm Meter  |  

Amprobe MO-100 Milliohm Meter

Click here to watch video

Amprobe MO-100 Milliohm Meter
Amprobe MO-100 Milliohm Meter
Amprobe MO-100 Milliohm Meter

Diagnose potential failure with the MO-100, portable battery powered milliohm meter. Quickly check windings opens or shorts in motors, generators and transformers, wire-to-wire connection resistances, heating elements testing and contact resistance in critical electrical connections.

Amprobe MO-100 Milliohm Meter is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Very useful in the HVAC/R Trade. I used this tool to prevent major calls in the middle of the night. Its helps me generate sales to customers. I show them that their compresors, motors, transformers are about to go out, and most of them want to change the bad part with in a day or two. Of course, I had customers who have wished to listen to me.
Date published: 2012-03-29
Rated 5 out of 5 by from Excellent Value This meter enabled us to isolate and identify a defective appliance cord that was causing nuisance CAFCI trips. Isolation did not work, failures were minimum 4 days apart. Moving the load stopped the failures (cord flexed differently). This is now a new weapon in our troubleshooting arsenal.
Date published: 2012-02-29
  • y_2017, m_12, d_10, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_73288, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Accurate four terminal measurement down to 100µ ohms does not require test leads resistance compensation
  • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm
  • Measurement precision with three test currents with over-temperature protection
  • Protection against inadvertent connection to overvoltage
  • Large LCD
  • Potential lead resistance, current lead resistance checks
  • Auto-hold and auto-off features
  • Lightweight, robust & compact.
  • Indicates measurement errors due to temperature or connection problems
  • “O-Ring sealed enclosure
  • Battery powered
  • IEC / EN 61010-1
  • Test leads, Instruction manual, Shoulder belt, 1.5V(AA) x 8 Batteries
FEATURE MO-100
Measuring range 0 → 200.0 mO in steps of 100 µO
0 → 2000 mO in steps of 1 mO
0 → 20.00 O in steps of 10 mO
0 → 200.0 O in steps of 100 mO
0 → 2000 O in steps of 1 O
Test current 1 mA (2000 O range)
10 mA (20 O / 200 O range)
100 mA (200 mO / 2000 mO range)

Specifications
Measuring ranges: 0-200.0m ohms in steps of 100µohm
0-2000m ohms in steps of 1m ohm
0-20.00 ohms in steps of 10m ohm
0-200.0 ohms in steps of 100m ohm
0-2000 ohms in steps of 1 ohm
Accuracy: ±0.5% of reading ±2 digits over the operating temperature range, -15°C to 55°C (5°F to 131°F), with the supplied test leads
Test current: 1mA =>2000 ohms range
10mA =>200/ 20 ohms range
100mA =>2000m / 200m ohm range
Accuracy: ±0.1%
Protection fuses: Mains = 0.5A, HBC, 5 x 20mm, DIN
Current = 0.5A, HBC, 5 x 20mm, DIN
Voltage = 0.5A, HBC, 5 x 20mm, DIN
Maximum output
Voltage (C1-C2) 20V



For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
MO-100
  • Accurate four terminal measurement down to 100µ ohms does not require test leads resistance compensation
  • Ranges from 200.0m ohms to 2000 ohms with minimum resolution of 100µ Ohm
  • Measurement precision with three test currents with over-temperature protection
Included Accessories:   Users manual, test leads, batteries (installed)
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe