Home  |  Products  |  Clamp Meters  |  AMP 200-300 Series   |  

AMP-210 600A AC TRMS Clamp Meter

Click here to watch video

AMP-210 TRMS Clamp Meter front
AMP-210 TRMS Clamp Meter front
AMP-210 TRMS Clamp Meter side angle
AMP-210 TRMS Clamp Meter testing small diameter wire with Amp-Tip function
AMP-210 TRMS Clamp Meter testing capacitor with capacitance measurement function

With a full range of AC current, AC/DC voltage, and frequency measurement functions for basic electrical troubleshooting, the AMP-210 clamp meter with its large backlit display is an excellent amp clamp meter choice. Rated CAT III 600 V, the AMP-210 clamp meter offers True-RMS sensing, fast response processor, non-contact voltage detection, capacitance, resistance and continuity measurements to enhance efficiency and safety in today’s complex electrical environments. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, enabling accurate current measurement of both large and small diameter wires. A low pass filter allows measurement of current and voltage on variable frequency drives (motors with speed controlled by frequency).

AMP-210 600A AC TRMS Clamp Meter is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Great value for the money I was needing a new meter, and when I went shopping for one, I chose the Amprobe Amp-210. I'm very satisfied, and now prefer this meter over the Fluke I had previously. It has a large display, is lightweight, but is also durable. I know this because I've dropped it a few times. I would recommend this meter to anyone that needs one.
Date published: 2015-06-01
Rated 5 out of 5 by from this products is an indispensable tool for an electrician. I have been using amprobe producta since early 70. Your amprobes proved to be a very good tools when you are troubleshooting electrical probles. May it be short circuits or over currents. I had your amprove recorder, which proved invaluable in recording currents in a very delicate situation, where the problem laid on a motor. Thanks to the recorder it was found. Thanks for making excellent products Joaquin
Date published: 2015-05-27
Rated 4 out of 5 by from I borrowed this amp clamp from one of my fellow electricians when my Fluke wasn't available I borrowed this amp clamp from one of my fellow electricians when my meter wasn't available. It actually impressed me because it was lighter & had a good feel in my hand & had about the same ranges as my meter.
Date published: 2015-05-26
  • y_2017, m_8, d_12, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_79181, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Measures AC Current to 600 A and AC/DC Voltage to 600 V
  • Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
  • Amp-Tip delivers precise low AC current measurements – 0 to 60 A
  • Includes a low pass filter to accurately measure voltage and current on variable frequency drives
  • Capacitance measurement, continuity beeper and diode test
  • Provides resistance and continuity measurement capabilities to verify the quality of electrical connections and the proper operation of motor and transformer coils
  • Offers data hold and relative zero for quick analysis
  • Maximizes battery life with auto power off and low battery indicator
  • Backlit display for easy measurement viewing in bright and dim environments
  • Accommodates conductors up to 1.18 in (30mm)
  • Includes test leads, batteries (installed), carrying case, and user manual
  • CAT III 600 V safety rated
FEATURE AMP-210 AMP-220 AMP-310 AMP-320 AMP-330
AC voltage (True-rms) Range: 0 to 600.0 V 0 to 1000.0 V
Accuracy: ±1.0% + 5LSD (50 to 60 Hz) ±0.8% + 5LSD (50 to 60 Hz)
DC voltage Range: 0 to 600.0 V
Accuracy: ±1.0% + 5LSD
AC+DC voltage Range: 0 to 600.0 V 0 to 600.0 V 0 to 1000.0 V
Accuracy: ±1.2% + 7LSD (50 to 60 Hz) ±1.2% + 7LSD (50 to 60 Hz) ±1.0% + 7LSD (50 to 60 Hz)
±1.8% + 7LSD (DC 40 to 200 Hz)
±1.2% + 7LSD 200 to 400 Hz)
AC current Range: 0 to 600.0 A
Accuracy: ±1.8% + 5LSD (50 to 60 Hz)
±2.0% + 5LSD (100 to 400 Hz)
DC current Range: 0 to 600.0 A 0 to 600.0 A 0 to 1000.0 A
Accuracy: ±2.0% + 5LSD (DC 50 to 100 Hz) ±2.0% + 5LSD (DC 50 to 100 Hz) ±1.8% + 5LSD (DC 50 to 100 Hz)
AC+DC current Range: 0 to 600.0 A 0 to 600.0 A 0 to 1000.0 A
Accuracy: ±2.2% + 7LSD (DC 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz)
±2.2% + 7LSD (DC 50 to 100 Hz)
±2.7% + 7LSD (100 to 400 Hz)
±2.2% + 7LSD (40 to 100 Hz)
±2.5% + 7LSD (100 to 400 Hz)
Precise low current AC Range: 0 to 60.00 A
Accuracy: ±1.5% + 5LSD (50 to 60 Hz) ±1.5% + 5LSD (50 to 60 Hz)
±2.0% + 5LSD (0.00 to 20.00 A, 100 to 400 Hz)
±3.0% + 5LSD (>20.00 to 60.00 A, 40 to 100 Hz)
±3.0% + 5LSD (>20.00 to 60.00 A, 100 to 100 Hz)
Precise low current DC Range: 0 to 60.0 A 0 to 60.0 A 0 to 60.00 A
Accuracy: ±2.0% + 5LSD ±2.0% + 5LSD ±1.5% + 5LSD (0.00 to 20.00 A)
±3.0% + 5LSD (>20.00 to 60.00 A)
Micro amps Range: 0 to 2000 µA
Accuracy: ±1.0% + 5LSD
Frequency Range: 5.00 to 999.9 Hz
Accuracy: ±1.0% + 5LSD (600 V range)
Range: 50.0 to 400.0 Hz
Accuracy: ±2.0% + 4LSD (600 A range)
Resistance Range: 0.0 to 60.00 kΩ
Accuracy: ±1.0% + 5LSD
Capacitance Range: 0.0 to 2500 µF
Accuracy: ±2.0% + 4LSD
Continuity beeper ON ≤ 10 Ω
Off > 250 Ω
Temperature*
(Type K thermocouple)
  -40.0 to 752 °F
-40.0 to 400 °C
  ±1.0% + 3.0 °F (-40.0 to 14.0 °F)
±1.0% + 1.5 °F (>40.0 to 99.9 °F)
±1.0% + 2.0 °F (100 to 752 °F)
±1.0% + 1.5 °C (-40.0 to 10.0 °C)
±1.0% + 0.8 °C (>-10.0 to 99.9 °C)
±1.0% + 1.0 °C (100 to 400 °C)
Non-contact voltage 10 V to 1000 V AC (50 to 60 Hz)
Phase rotation indication   Rotation-R for main supply
Rotation-M for motors
Diode test  
Jaw opening   1.18 in (30 mm) 1.37 in (35 mm) 1.18 in (30 mm) 1.37 in (35 mm) 2.0 in (51 mm)
Safty rating   CAT III 600 V CAT IV 600V
CAT III 1000 V
Special Features
In-rush current  
Peak hold (Crest)  
Relative zero  
Max/Min/Avg  
Data hold  
Backlight  
Auto power off  
Work light  

*Error does not include Type-K thermocouple errors

For complete specs please download the product datasheet under the "Resources" tab.

Model NameDescriptionBuy it
AMP-210

AMP-210 600A AC TRMS Clamp Meter

  • True-RMS
  • Voltage up to 600 V AC/DC, Current up to 600 A AC, resistance and frequency
  • Low pass filter for variable frequency drives
  • Amp-tip function for precise low current measurements down to the tenth of an Amp
  • Capacitance measurement for start and run motor capacitors
  • Non-contact voltage detection
  • Audible continuity and diode test
  • Data hold, relative zero
  • Large LCD backlit display
  • Accommodates conductors up to 1.18 in (30mm)
  • CAT III 600 V safety rated

Included Accessories: Test Leads, (2) AAA Batteries (installed), User Manual, Carrying Case

           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe