Home  |  Products  |  Clamp Meters  |  Multimeter Clamps  |  

Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter

Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter
Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter

Amprobe ACD-10 TRMS-PLUS clamp meter takes AC/DC measurement with true-rms accuracy and offers capacitance and frequency.  It also offers thinner jaws over standard clamp meters allowing access to tight areas and still accommodates conductors up to 25 mm.

Amprobe ACD-10 TRMS-PLUS 600A Clamp Multimeter is rated 4.9 out of 5 by 16.
Rated 5 out of 5 by from A Brand you can trust you life on. This is an all around great Meter. Amprobe always sells quality equipment. Test Equipment I can trust my life with.
Date published: 2018-09-17
Rated 5 out of 5 by from Great product Has worked great and acurate to all readingsvery durable too better thanall others ive ever used
Date published: 2018-08-10
Rated 5 out of 5 by from Great meter. Meter is slim and subcompact. Holds up well from the abuse I put it through. 5 stars for sure.
Date published: 2018-07-18
Rated 5 out of 5 by from Great customer service on a great tool. When this unit arrived, it was not in working order. I contacted Amprobe and returned for warranty replacement via a prepaid shipping label sent by them. The replacement tester arrived in about 2 weeks with no questions asked and it works great. The new unit that they sent was a complete tester with leads, case, etc. So we ended up with spare leads, case, battery, etc. Overall, except for the delay in getting a working tool, we are very happy and Amprobe Customer Service is the best. I own many Amprobe products and will purchase others in the future.
Date published: 2016-04-05
Rated 5 out of 5 by from Cost effective to own one for every truck. Durable, dependable easy to use. For many years we have bought this same meter so everyone has the same meter in every truck. It's easy to use, there are no complaints from the guys. Along with the basics it includes TRMS and DCV.
Date published: 2015-05-26
Rated 5 out of 5 by from This product has thin jaws that you need. I just got this meter and I love it. I am an appliance repairman, these new refrigerators don't give you any room at the compressor to check the amperage load, all other clamp meters have jaws that are way to thick. with them I have to split the wire shroud at the compressor to get enough room to take a reading, with the acd-10 trms-plus you don't have to. plus you need TRMS to get an accurate reading. just a half an amp difference can mean a good or bad compressor in these new style compressors.
Date published: 2015-05-07
Rated 5 out of 5 by from this product is compact and has it all this product is just a great all around meter! that is easy to carry when working in the field
Date published: 2014-09-04
Rated 5 out of 5 by from solid meter We use this meter in an HVAC program. It is easy to use, reliable and tough.
Date published: 2012-04-01
  • y_2019, m_4, d_23, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_73066, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin jaws, only 10mm (0.4) thick
  • Resistance to 40MΩ
  • Continuity buzzer
  • Capacitance to 3000 uF
  • Frequency measurement
  • In rush current
  • Hold & maximum reading functions
  • Accommodates conductors up to 26mm (1.02) in diameter
  • Auto ranging
  • Auto power off
  • Rubber over-molded case
  • Overload protected
  • True-rms measurement
  • Included accessories: test leads, battery installed, soft carrying pouch, and users manual
True-rms -
AC Voltage 4.000 V, 40.00 V, 400.0 V, 600 V
DC Voltage 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 600 V
AC Current 40.00 A, 400.0 A, 600 A
Resistance 400.0 µΩ, 4.000 Ω, 40.00 Ω, 400.0 Ω, 4.000 MΩ, 40.00 MΩ
Capacitance 500.0 nF, 5.000 F, 50.00 CF, 500.0 µF, 3000 µF
Frequency 40 Hz → 400 Hz with Jaw, 10 Hz → 100 kHz with test leads
Temperature - -
Dual displays - -
Micro Amps - -
Accommodates conductors up to 1.0" (25 mm) in diameter

Display: 3-3/4 digits 4000 counts LCD display
Update rate: 3 per second nominal
Polarity: Automatic
Operating temperature: °C to 40 °C; < 80% RH for temperature up to 31 °C decreasing linearly to 50% RH at 40 °C
Altitude: Operating below 2000m; Indoor use
Storage temperature: -20 °C to 60 °C, < 80% RH (with battery removed)
Temperature coefficient: nominal 0.15 x (specified accuracy)/°C @(0 °C ~ 18 °C or 28 °C ~ 40 °C)
Low battery: Below approx. 2.4V
Power supply: 3V coin battery IEC-CR2032
Power consumption: 2.8 mA typical except that 3.3 mA typical for ACA function
APO timing: Idle for 30 minutes
APO consumption: 5 µA typical
Jaw opening & conductor diameter: max 26 mm
Special features: 30ms Max Hold; Data Hold; Relative Zero mode

For complete specs please download the product datasheet under the “Resources" tab.
Model NameDescriptionBuy it
  • TRMS Measurement
  • AC & DC Voltage to 600V
  • AC Current to 600A
  • Thin Jaws, only 10mm (0.4”) thick
  • Resistance to 40MΩ
Included Accessories:   Test leads, battery (installed), soft carrying pouch, users manual

Test LeadsBuy it
DL248DAmprobe DL248D

OtherBuy it
ELS2AELS2A AC Current Clamp Accessory
Related Products

10 reviews
 Amprobe ACD-10 PLUS 600A Clamp Multimeter »

28 reviews
 Amprobe ACD-14 PLUS Dual Display Clamp Multimeter with Temperature »

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2019 Amprobe