Home  |  Products  |  Clamp Meters  |  Compact - Multimeter clamps  |  

Amprobe AMP-25 Mini-Clamp

Click here to watch video

The AMP-25 is smaller than a standard pen.
The AMP-25 is smaller than a standard pen.
Use the inrush current function for motor start-up monitoring.
Troubleshoot electrical systems and measure AC/DC load current on exposed wires in a breaker panel.
Pocket-sized for quick and easy spot checks of electrical systems.

Small size doesn’t mean small features. The Amprobe AMP-25 Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, the AMP-25 is a must-have professional troubleshooting tool for commercial electricians and electrical contractors.

The AMP-25 is designed to measure AC/DC load current and inrush current for motors. Essential features like True-RMS, non-contact voltage and low pass filter make this clamp stand tall next to clamps twice its size. With the AMP-25, you never have to sacrifice performance for size.

Amprobe AMP-25 Mini-Clamp is rated 4.8 out of 5 by 6.
Rated 5 out of 5 by from Is something all electrican need It a great product to have. IT should be in every home.
Date published: 2016-07-26
Rated 5 out of 5 by from Small size, good accuracy & resolution I find the AMP-25 Mini-Clamp is a good all around tool for measuring current in tight MCC enclosures other hard to reach locations. It is small enough, and rugged enough, to keep in my toolbox for easy access but has the accuracy and resolution I need for motor or LP balance checks.
Date published: 2015-05-27
Rated 5 out of 5 by from a great fit! Perfect size for service tech. Has all the features needed and doesn't take up much room in the tool bag. Why would anyone buy the bigger ones?
Date published: 2015-05-26
Rated 5 out of 5 by from This is a great product I carry the AMP-25 in my pocket on a daily basis, with a pocket meter. It is small enough that I don't notice it,and It is great to take on a check of a motor, before you drag out the tool bag and the normal meter. Fits in tight places. Really easy to use and long stand by battery life.
Date published: 2015-05-26
Rated 5 out of 5 by from Awesome Great meter. Nice high quality feel. First measurement I made was inrush current on a refrigerator. So simple compared to my previous methods. Precise and useful printed instruction manual. Couldn't open the included min-DVD, but I think that's my issue. This site probably has all the same info?
Date published: 2015-05-11
Rated 4 out of 5 by from its my little guy the lost of star was cause no rubber on the meter all plastic but everything else is great thank you amprobe for great product that never cuts corners
Date published: 2015-05-06
  • y_2017, m_8, d_12, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_79312, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_amprobe
  • Features True-RMS sensing for accurate voltage measurements in noisy electrical environments
  • Measures AC/DC current to 300 A (10mA resolution)
  • Includes a low pass filter to accurately measure voltage and current on variable frequency drives
  • Inrush current for motor start-up monitoring
  • Non-contact voltage detection (NCV) for detecting presence of voltage
  • Jaw opening to 1 in (25 mm)
  • Autoranging
  • DCA zero and data hold
  • Maximizes battery life with auto power off
  • Backlit display for easy measurement viewing in bright and dim environment
  • CAT III 600 V safety rated
Feature AMP-25 Best Accuracy
AC Current(1) 60.00 / 300.0 A +/-(1.5% + 5 LSD)
@ 50 to 100 Hz ≥ 3 A
+/-(2.5% + 5 LSD)
@ 100 to 400 Hz ≥ 3 A
DC Current(2) 60.00 / 300.0 A +/-(1.5% + 5 LSD)
@ 300 A range
Low Pass Filter 300.0 A +/-(3.5% + 5 LSD)
@ 50 to 60 Hz ≥ 3 A
True-RMS  
Inrush Current  
Non-Contact Voltage  
Data Hold  
(1)Note: Crest Factor (C.F.) may be up to 3.0 as 4000 counts.
For non-sinusoidal waveforms:
Add 3.0% for C.F. 1.0 to 2.0
Add 5.0% for C.F. 2.0 to 2.5
Add 7.0% for C.F. 2.5 to 3.0
Position error of clamp: +/- 1.5 % of LCD reading
(2) Add 10 LSD in auto AC/DC sense mode
           

Home  | About Us  |   Privacy Statement  | Site Map  |  Contact Us © 1995 - 2017 Amprobe